وظائف مدير أنظمة لينكس - يونكس في الجزائر
٩١ وظائف شاغرة
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Design and deploy telecommunications infrastructures. Install, configure, and commission network and telecom equipment. Ensure preventive, corrective, and evolutionary maintenance of installations. Diagnose and resolve technical incidents within the given timeframes. Monitor the proper functioning of networks and analyze their performance. Perform validation and commissioning tests on equipment. Participate in infrastructure modernization and expansion projects. Write technical documentation, procedures, and intervention reports. Ensure compliance with quality, safety, and HSE standards and procedures. Coordinate interventions with clients, suppliers, and internal teams. Train users or technical teams on new equipment as needed. Conduct technological monitoring to propose innovative solutions.</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><font dir="auto" ><font dir="auto" >Qualifications: Engineering degree or Master's degree (Bac+5) in Telecommunications, Networks, Computer Science, or equivalent field. Experience: 2-5 years in a similar position (depending on the position level).</font></font></p><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>Design, study and supervise electrical installations for projects. Ensure technical monitoring of work and compliance with current standards. Carry out studies, calculations and dimensioning of electrical equipment. Diagnose faults and propose appropriate technical solutions.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bac +5 Experience in a similar position Good knowledge of electrical standards and safety regulations. Rigor, analytical skills, autonomy and team spirit.</p><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Provide technical oversight for construction and infrastructure projects. Prepare, review, and monitor project technical documentation. Supervise and control the execution of work on site. Ensure compliance with specifications, deadlines, and quality and safety standards. Coordinate the various project stakeholders (companies, engineering firms, suppliers, and subcontractors). Prepare progress reports and provide technical monitoring of projects. Participate in technical acceptance procedures and the resolution of outstanding issues. El Tarf Souarekh</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><font dir="auto" ><font dir="auto" >Master's degree (Bac +5) or Advanced Technician diploma in Civil Engineering. Entry-level candidates accepted. If you match this profile, please send your CV by clicking on the "Apply" tab.</font></font></p><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>Do you get energy when you can make your customers happy? Is your day successful when you can help them, whether they speak French AND English? Do you like to work in an environment where innovation and sustainability play an important role? Come and join a team where the National Sales Manager and your colleagues will be happy to support you with their expertise. We are looking for someone who enjoys autonomy and meeting new customers every day. Someone with an affinity for technology and a lot of "sales" appetite would be ideal for this role. Are you motivated to immerse yourself in the world of compressors, Oxygen and Nitrogen Generators? Are you interested in solutions that our products can offer in the form of energy or production line optimization? Do you like to put your energy into an ambitious growth plan and see it come to fruition? Then we would like to get to know you better and to see if you click, not only with our sales engineer job, but also with our own company values.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Good knowledge of our industry.</li><li>3+ years of experience in sales position.</li><li>University degree in Mechanical Engineering or another technical university degree.</li><li>An MBA or a Masters in a related field is a plus.</li><li>Excellent command of the local language and good command of English is a must.</li><li>Good computer Knowledge is a must.</li><li>Clean Driving license.</li></ul><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><ul> <li><font dir="auto" ><font dir="auto" ><font dir="auto" ><font dir="auto" >Methods Engineer</font></font></font></font></li><li><font dir="auto" ><font dir="auto" ><br></font></font></li><li><font dir="auto" ><font dir="auto" >Ensure compliance with regulatory equipment controls and the transmission of technical documentation.</font></font></li> <li><font dir="auto" ><font dir="auto" >Analyze and control the reliability of the data recorded in the CMMS.</font></font></li> <li><font dir="auto" ><font dir="auto" >Coordinate with the mechanical, electrical, automation and packaging operations departments.</font></font></li> <li><font dir="auto" ><font dir="auto" >to be the preferred contact person for the GMAO administration.</font></font></li> <li><font dir="auto" ><font dir="auto" >Create and update the CMMS tree structure for the business sector.</font></font></li> <li><font dir="auto" ><font dir="auto" >Code the parts in NAVISION and define the minimum stock levels.</font></font></li> <li><font dir="auto" ><font dir="auto" >Process purchase requests for spare parts.</font></font></li> <li><font dir="auto" ><font dir="auto" >Create and update preventive maintenance plans.</font></font></li> <li><font dir="auto" ><font dir="auto" >Follow the action plans resulting from regulatory controls.</font></font></li> <li><font dir="auto" ><font dir="auto" >Plan and control interviews and revisions while controlling costs.</font></font></li> <li><font dir="auto" ><font dir="auto" >Ensure compliance with store management rules (spare parts reservation).</font></font></li> <li><font dir="auto" ><font dir="auto" >To propose and suggest any technical improvements and to participate in their implementation if necessary.</font></font></li> </ul> <ul> <li><font dir="auto" ><font dir="auto" >University Diploma (Bac +5): in a specialty related to industry professions (Mechanical Engineering, Electromechanics, Industrial Maintenance, etc.).</font></font></li> <li><font dir="auto" ><font dir="auto" >Has prior experience in a similar role (ideally in the industrial sector).</font></font></li> <li><font dir="auto" ><font dir="auto" >Analytical, synthesis and organizational skills.</font></font></li> <li><font dir="auto" ><font dir="auto" >Possessing a team spirit and the ability to work in a team.</font></font></li> <li><font dir="auto" ><font dir="auto" >Autonomy, initiative, dynamism, rigor.</font></font></li> <li><font dir="auto" ><font dir="auto" >I have a perfect command of a CMMS software and the basic functionalities of at least one software.</font></font></li> <li><font dir="auto" ><font dir="auto" >My mastery of office software.</font></font><br></li> <li><font dir="auto" ><font dir="auto" >Excellent writing skills and mastery of languages: Arabic and French.</font></font></li></ul></div></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Conduct field measurements using high-tech equipment. Perform topographic measurements (measuring angles and distances). Calculate and delimit the terrain. Use satellite positioning (GPS). Contribute to the creation of the land registry. Using computer tools, transfer these measurements onto graphic documents. Create maps and plans using CAD and CAM software. Produce plans at different scales. Submit plans to the Surveying Engineer or Site Manager. Participate in the development of various infrastructure projects (roads, commercial areas, bridges, etc.).</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><font dir="auto" ><font dir="auto" >Master's degree in computer data processing</font></font></li><li><font dir="auto" ><font dir="auto" >My mastery of 3D drawing</font></font></li><li><font dir="auto" ><font dir="auto" >Mastery of CAD and CAM (Computer-Aided Design and Computer-Aided Drafting)</font></font></li><li><font dir="auto" ><font dir="auto" >Mastery of high-tech equipment</font></font></li><li><font dir="auto" ><font dir="auto" >Having 2 years of experience in the field</font></font></li></ul><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Design, program, and commission industrial automation systems. Perform diagnostics, troubleshooting, and maintenance on programmable logic controllers (PLCs) and control systems. Participate in the design and improvement of industrial machinery and equipment. Develop and modify PLC programs and supervisory interfaces (HMI/SCADA). Conduct trials, functional tests, and commissioning at customer sites. Write technical documentation and monitor project progress.</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><font dir="auto" ><font dir="auto" >Good knowledge of industrial networks and instrumentation. Analytical skills, autonomy, rigor, and organizational skills. Good interpersonal skills and ability to work in a team. If you match this profile, please send your CV by clicking on the "Apply" tab. Algiers Bab Ezzouar</font></font></p><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Main duties: Responsible for the maintenance and repair of mechanical parts of public works equipment and buildings. Duties and responsibilities: Identify and communicate to superiors any risks that could compromise the performance of their duties, and implement appropriate actions in accordance with guidelines; Review the requested work and distribute it among the staff, taking into account the complexity of the tasks and the qualifications of the staff under their authority; Conduct a diagnostic assessment and evaluate the scope and complexity of the work to be carried out; Ensure the availability of the necessary equipment, tools, and supplies; Organize, supervise, and monitor the work performed by the mechanical maintenance team; Supervises and monitors the progress of work, the quality of work performed by agents, and ensures compliance with repair deadlines; Participates in the execution of maintenance and dismantling work; Calls in team members on-site, at construction sites, and at any other location as needed; Expresses the requirements for spare parts for repairs and submits them to their supervisor; Ensures the proper use of equipment and tools used in the execution of work; Performs/monitors finishing work (adjustments, fine-tuning); Regularly reports to their supervisor on any difficulties exceeding their responsibilities. Regarding QHSE: Respects and enforces the general safety instructions and rules in force within the Company and the Project; Ensure the application of procedures and rules dictated within the framework of the Integrated Management System; Ensure the correct handling of sharp and blunt tools, both manual and electromechanical, in an appropriate manner and with caution, respecting safety rules; Ensure compliance with the safety instructions contained in the user manuals formulated by the manufacturers; Ensure the recovery of used oils and lubricants without soil contamination; Ensure the cleaning of premises and the maintenance of tools after use; Ensure the provision and wearing of appropriate collective and individual protective equipment (CPE and PPE); Raise awareness within the team of the risk-based approach; Capitalize on all feedback, communicate to management the need to review planned arrangements, and share acquired or modified knowledge with colleagues.</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><font dir="auto" ><font dir="auto" >General training: Technical Mechanic. </font></font><br><font dir="auto" ><font dir="auto" >Professional training: Installation technology, operating conditions, team management. </font></font><br><font dir="auto" ><font dir="auto" >Professional experience: 5 years. </font></font><br><font dir="auto" ><font dir="auto" >Availability: Immediate.</font></font></p><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Design, install, and maintain industrial electrical systems. Diagnose electrical faults and propose appropriate troubleshooting solutions. Participate in the design and improvement of industrial machinery and equipment. Perform testing, commissioning, and adjustments of installations. Develop electrical diagrams and technical documentation. Ensure compliance with quality, safety, and applicable procedure standards. Provide technical support to teams and clients.</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><font dir="auto" ><font dir="auto" >Analytical skills, autonomy, rigor and organizational skills. Good interpersonal skills and ability to work in a team.</font></font></p><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>Studies and Design: Analyze project needs and specifications. Conduct technical and economic feasibility studies. Develop design plans (site plans, long profiles, network plans, calculation notes, etc.) using CAD software (AutoCAD, Covadis, Mensura, etc.). Dimension works (roads, networks, etc.). Draft written documents for tender files (DPGF, CCTP, RC, etc.). Planning and Organization: Establish provisional work schedules. Coordinate different project stakeholders (engineering firms, companies, concessionaires, local authorities). Participate in the consultation and selection of companies. Site and Execution Monitoring: Provide technical assistance to site teams. Verify the conformity of completed works with plans and standards. Manage unforeseen issues and propose appropriate technical solutions. Monitor work progress and budget utilization. Validate work situations and settlements. Participate in site meetings. External Relations: Represent the company with clients, administrations, and concessionaires. Obtain necessary administrative authorizations. Technical and Regulatory Watch: Stay informed about technical and regulatory developments in the VRD field.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Education: Engineering degree or specialized Master's in Civil Engineering, Public Works, Water Engineering, or equivalent.</li><li>Experience: Significant experience in the design and/or monitoring of VRD projects.</li><li>Technical Skills: Mastery of CAD software (AutoCAD, Covadis, Mensura, etc.). Good knowledge of current standards and regulations (DTU, Eurocodes, etc.). Solid knowledge in hydraulics, geotechnics, earthworks, roads, and various networks. Ability to read and interpret technical plans.</li><li>Required Skills: Rigor and organization. Analytical and synthesis skills. Autonomy and proactivity. Good interpersonal skills and team spirit. Ability to manage multiple projects simultaneously. Strong written and oral communication skills.</li></ul><p></p></section>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br>What this opportunity involves: We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br> You'll create challenging tasks and evaluation criteria within realistic simulated environments: Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate What we look for: 8+ years in software development Core stack: Python (FastAPI), JavaScript/TypeScript (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+ Why this is hard: Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution.<br> Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paidEffort estimate Tasks for this project are estimated to take 30 hours to complete, depending on complexity.<br> This is an estimate and not a schedule requirement; you choose when and how to work.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation: Up to $150/hr equivalent , depending on level and pace.<br> Tasks are estimated at ~30 hours each; you set your own schedule.<br></span> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Overview:</p><p>The primary functions of an AFE is to manage the spares movement inbound and outbound the warehouse, resolution of minor incidents that are raised by our customers and assisting on parts deliveries to Field Engineers & Service Partner Engineers onsite. Incidents and changes can be related to Servers, tape libraries/drives, storage devices, printers, and various other pieces of equipment.</p><p>Primary Workflow:</p><ul><li>Spares management inbound and outbound the warehouse</li><li>Handle quarterly stock take in Local Warehouse & Service Partner Warehouses</li><li>Onsite minor break-fix hardware maintenance (Hot swap hard disk replacement, cable reseat, etc)</li><li>Conduct onsite physical & logical audits for proactive sparing.</li><li>Perform quarterly onsite preventive maintenance per assigned customer.</li><li>Handle spare parts deliveries to FE, SeP & client.</li><li>Issuance of IMR’s, POR’s</li><li>Assist VCA’s & BDA’s for investigating missing parts from stock counting.</li><li>Customer communication</li><li>Updating TRT internal procedures</li><li>Learning additional technical and non-technical skills.</li><li>Sourcing Local Service Partners</li><li>Sourcing Local Logistic Partner / Supplier</li></ul><p><br></p><p>Required Deliverables:</p><ul><li>Ensure above 95% accuracy between NetSuite inventory database and actual TRT & SeP warehouse spares.</li><li>Ensure all supported incidents or tickets are resolved within SLAs.</li><li>Ensure all customer communication is prompt, professional and reliable.</li><li>Ensure all commitments made to customers are met or re-scheduled with the customer’s knowledge and approval.</li><li>Continuously learn additional technical and non-technical skills</li><li>Escalate calls through the correct channels promptly.</li><li>24 x 7 Support Structure</li><li>Comply fully with company policy to always protect the interests of TRT.</li><li>Ensure local SeP is available for onsite requirements.</li><li>Working with VCA team for local parts sourcing</li></ul><p>Accountabilities:</p><ul><li>Local ticket management/status monitoring and make sure they are resolved within SLAs.</li><li>Warehouse inventory movement monitoring</li><li>Ensure warehouse parts labelling & binning is compliant with TRT global standard</li><li>Ensure procedures are properly followed when onsite</li><li>Ensure on time support for spare parts</li></ul><p>Disaster Recovery:</p><ul><li>Coordination within FE / SeP team for urgent part requirement onsite</li><li>Handle coordination & keep good working relationships with logistics and service partners.</li><li>Coordination with known local vendors for urgent logistics sparing.</li><li>Coordination with VCA, BDA & GSD division for parts needed for a call.</li><li>Coordination with VCA, BDA & GSD division for inventory movement</li><li>Appropriate escalation to Shift leader or Field Services Team Leader when necessary.</li></ul><p><br></p><p>Service Call Updates:</p><ul><li>Ensure timely updating to GSD & FE for calls requiring additional parts on-site.</li><li>Ensure that all onsite service calls under your responsibility are updated to the GSD Team within the agreed Service Level of the client contract.</li></ul><p>OH&S Work Environment:</p><ul><li>Ensure that the warehouse or technical work areas remain clean and always organized.</li><li>Ensure that you adhere to ESD procedures.</li><li>Ensure that you adhere to all OHS requirements, including for lifting, cabling, rack mounting, and equipment in rooms that do not obstruct walkways.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>Requirements:</p><ul><li>Candidates must possess a college degree. Training and Certification would be an advantage.</li></ul><p>· Certification on Various Networking platforms</p><p>· Strong understanding of Networking fundamentals</p><p>· Cisco and Juniper Certification preferred.</p><p>· Solaris – Oracle Certified Professional</p><p>· VMWare – VMWare Certified Professional</p><p>· TSM - IBM Certified Deployment Professional</p><p><br></p><ul><li>Preferably have 7 years up of experience in IT spare parts control & warehouse maintenance</li></ul><p>Willing to be assigned in TRT office location, and to travel to TRT offices globally on as needed basis.</p></div>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>Ensure the technical, operational and administrative follow-up of projects or activities to guarantee their compliance with requirements (quality, deadlines, costs), particularly according to the requirements of the ISO 9001 standard, and enable decision-making based on reliable data.</p><p><b>JOB MISSIONS</b></p><ul><li>Ensure the follow-up of project progress (planning, costs, quality).</li><li>Collect, analyze and consolidate follow-up data.</li><li>Develop dashboards and periodic reports.</li><li>Identify deviations and propose corrective actions.</li><li>Coordinate with field teams and stakeholders.</li><li>Ensure compliance with procedures, standards, and specifications.</li><li>Participate in the implementation and improvement of the quality management system (ISO 9001).</li><li>Participate in internal and external audits (preparation, support, follow-up of actions).</li><li>Ensure traceability of information and project documentation.</li><li>Contribute to the continuous improvement of processes.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Technical skills:</b></p><ul><li>Mastery of project management tools.</li><li>Data analysis and reporting.</li><li>Good knowledge of the ISO 9001 standard and quality management systems.</li><li>Experience or participation in internal and external audits.</li><li>Ability to implement and monitor quality procedures.</li><li>Good technical understanding of the business area.</li></ul><b>Behavioral skills:</b><ul><li>Rigor and organizational skills</li><li>Analytical and synthesis skills</li><li>Good written and oral communication</li><li>Ability to work in a team</li><li>Responsiveness and sense of responsibility</li></ul><b>AUTHORITY:</b><ul><li>Request and collect all information necessary for project monitoring</li><li>Access technical documents, planning and performance data</li><li>Report non-conformities and require the implementation of corrective actions</li><li>Propose improvements to processes and monitoring tools</li><li>Actively participate in steering committees and provide technical opinion</li><li>Contribute to decisions related to quality and compliance with ISO 9001 requirements</li><li>Interact with internal and external auditors within the framework of audits</li></ul>If you match this profile, please send your CV by clicking on the "apply" tab<p></p></section>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
Yassir is the leading super App in the Maghreb region set to changing the way daily services are provided. It currently operates in 45 cities across Algeria, Morocco and Tunisia with recent expansions into France, Canada and Sub-Saharan Africa. It is backed (~$200M in funding) by VCs from Silicon Valley, Europe and other parts of the world.<br>
We offer on-demand services such as ride-hailing and last-mile delivery. Building on this infrastructure, we are now introducing financial services to help our users pay, save and borrow digitally.<br>
Helping usher the continent into a digital economy era. We’re not just about serving people - we’re about creating a marketplace to bring people what they need while infusing social values.<br>
<br><br><p><b>About your role as QA Engineer</b></p><br><ul>
<li>Review requirements, specifications, and technical documents to provide feedback; analyze test results to ensure software meets quality standards</li>
<li>Create, execute, and manage test cases (both manual and automated), including detailed plans for comprehensive coverage</li>
<li>Document testing phases, report bugs, and track defects efficiently. Perform thorough regression testing to verify bug fixes</li>
<li>Work with cross-functional teams throughout the software development lifecycle to maintain quality and troubleshoot issues</li>
<li>Conduct post-release/post-implementation testing to ensure product stability and quality in real-world usage</li>
<li>Design and develop automation scripts using open source tools. Stay updated with new testing tools and strategies to enhance efficiency</li>
<li>Estimate, prioritize, and coordinate testing activities to align with project timelines and objectives</li>
<li>Liaise with internal teams to understand system requirements and monitor the debugging process to ensure effective resolution of issues<br></li>
</ul><br><p><b>About your experience</b></p><br><ul>
<li>2 - 4 years of hands-on experience with manual and automated mobile testing on Android and iOS platforms</li>
<li>Hands-on experience in developing automated test cases in at least one programming language</li>
<li>Proven working experience with Agile project management, QA methodology, and test management software</li>
<li>Hands-on experience with API Testing frameworks such as Postman</li>
<li>Hands on experience with test management tools such as Xray</li>
<li>Ability to design and write test cases in BDD format</li>
<li>Experience in Smoke Testing, Sanity Testing, Performance Testing, end-to-end application testing</li>
<li>Hands-on experience with the Robot framework is a plus</li>
<li>Experience in a rapidly growing company in the mobility, on-demand or fintech space is a plus</li>
<li>BSc/MSc in Engineering, Computer Science or relevant field<br><br></li>
</ul><br><p><b>Why you should join Yassir:</b></p><br><ul><li>
You will be part of one of the first Algerian startups to go through the Y Combinator program and one of the fastest-growing tech companies in North Africa. We are current in +30 cities (Algeria, Tunisia, Morocco, Senegal, France and Germany)<br>
Attractive salary and you even get a stake in the company<br>
Subsidized public transit pass<br>
Have a lasting impact on our company's culture<br>
Perfect timing with renowned investors to build something great<br>
Extremely steep learning curve with own responsibility and intensive guidance<br>
Make a real impact on the world by helping us bring affordable financial and on-demand services to millions of Africans<br><br></li>
</ul><br> </div>
<p><font dir="auto" ><font dir="auto" >The technical engineer is responsible for: Assisting with premises development projects; Conducting site visits for projects as needed; Developing specifications for project management; Assisting the Regional Directorate of Equipment (DRE) in launching consultations and preparing files to be submitted to the bid evaluation committee; Finalizing the project outline in collaboration with the selected design office and user organizations; Ensuring compliance with contractual clauses with the selected design office; Conducting regular site visits within their area of responsibility; Analyzing and evaluating the technical files of various investment projects for which funding is requested; Monitoring and controlling bank-financed projects nationwide, at the request of credit institutions; Checking invoices/progress reports for completed work on projects financed and/or financed by the bank; Preparing project progress reports. Property condition reports, visit or meeting minutes, and market value of real estate. He stays informed of the various laws and decrees governing the construction sector. He monitors developments in the real estate market at the national level. </font></font></p><p><strong>Desired Candidate Profile</strong></p><ul><li><font dir="auto" ><font dir="auto" >Diploma in Architecture or State Engineering Diploma in Civil Engineering</font></font></li><li><font dir="auto" ><font dir="auto" >Professional: 3 years of professional experience in the field</font></font></li><li><font dir="auto" ><font dir="auto" >Technical skills: architecture, mathematics, civil law, drawing</font></font></li><li><font dir="auto" ><font dir="auto" >State engineering degree in construction subsidiaries.</font></font></li><li><font dir="auto" ><font dir="auto" >Professional: Professional experience (minimum 2 years) in the field of construction, project study and monitoring/ Real estate evaluation.</font></font></li><li><font dir="auto" ><font dir="auto" >Technical skills: Architecture, Civil Engineering, building, construction, public procurement, real estate, proficiency in computer tools, writing skills.</font></font></li></ul>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>Design and monitor public works projects. Prepare technical studies and execution files. Supervise on-site works. Control compliance with costs, deadlines, and quality standards. Coordinate different stakeholders. Draft technical reports.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Degree in Public Works Engineering or Civil Engineering. 3-5 years of experience desired. Proficiency in technical software (AutoCAD, MS Project...). Analytical mindset and sense of responsibility.</p><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Perform initial tuning of newly integrated sites. Analyze radio KPIs and identify areas for improvement. Optimize radio parameters to improve network coverage, capacity, and quality. Identify and resolve performance issues after site integration. Conduct post-integration checks and validate the performance of new sites. Collaborate with integration, deployment, and optimization teams. Monitor corrective actions and produce activity reports.</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><font dir="auto" ><font dir="auto" >Engineering degree or Bac+5 in Telecommunications, Networks or equivalent.</font></font></li><li><font dir="auto" ><font dir="auto" >Experience in radio optimization or initial tuning of mobile networks.</font></font></li><li><font dir="auto" ><font dir="auto" >Good knowledge of GSM, UMTS, LTE and/or 5G NR technologies.</font></font></li><li><font dir="auto" ><font dir="auto" >Mastery of radio KPI analysis and network optimization principles.</font></font></li><li><font dir="auto" ><font dir="auto" >Knowledge of equipment.</font></font></li><li><font dir="auto" ><font dir="auto" >Analytical mind, rigor and good problem-solving skills.</font></font></li><li><font dir="auto" ><font dir="auto" >Good level of communication and ability to work in a team.</font></font></li></ul><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>Review technical reports and ensure follow-up of interventions. Ensure follow-up of homologation of finished products and components. Work on, update and follow up on product technical files. Participate in the follow-up and coordination of development projects for finished products and components. Contribute to the continuous improvement of products and processes. Coordinate with different departments to ensure follow-up and validation of product manufacturing on production lines. Ensure correspondence and coordination with local and foreign suppliers for the collection and updating of component and product technical files.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bac+5 Mechanical Engineering, Energy, Electronics, Electromechanics, or equivalent specialty. Experience in a similar position.</p><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p>Examination of technical contractual conditions. Technical coordination of the project team and monitoring the development of supplies, the supplier evaluation process, and the development of purchasing activities (writing in the first person of the technical specification for the purchase of components and services / technical alignment of the offer). Monitoring the development and implementation of equipment and commissioning of components.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>We are looking for:</h2><ul><li>Good problem-solving and teamwork skills.</li><li>Good interpersonal and communication skills with clients and suppliers.</li><li>TP Engineer degree.</li><li>Two years of experience in coordinating the technical part of the project.</li><li>Computer skills: Ms. Project (Good); Autocad (Good); CAD programs for developed diagrams / Engineering Base (Good).</li><li>Language skills: Good knowledge of written and spoken French.</li></ul><p></p></section>
<section><p class="heading jdMain">Job Description</p><p class="heading">Roles & Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Ensure the smooth operation of the unit/workshops, ensuring the conformity of manufactured products. Optimize industrial installations and process improvements. Analyze laboratory results to adapt operating parameters for the refinery/workshops under their responsibility. Participate in planning technical shutdown periods for the various units and ensure priorities are established. Define control adjustment instructions for production staff. Propose technical and economic manufacturing objectives in consultation with their supervisor. Participate in the preparation of various weekly and monthly production dashboards using data sheets provided by colleagues to optimize and strengthen process control. Participate in new expansion and improvement projects. Participate in water testing of new installations. Contribute to the annual production report. Ensure process continuity. During job changes, manage intervention requests with the relevant support services, in agreement with your hierarchical superior, particularly during manufacturing meetings. Provide technical support to users and production teams. Execute all tasks and/or missions related to the activity of the Directorate/Service requested by the hierarchy. Ensure the application and compliance of PRPs and report any deviations concerning them. Ensure the application of the HACCP/PRPO plan, make all records and ensure its monitoring. Proficiency in microcomputers: Office automation and Office Suite. Prior experience working on an Information System is a plus. Fluency in Arabic and French. Excellent writing skills. Rigor and organization. Ability to prevent and manage conflicts or sensitive situations and handle emergencies. Proficiency in computer tools (Windows Office, Office 365, etc.). Strong communication skills. Good team management skills with a leadership mindset. If you match this profile, please send your CV by clicking on the "Apply" tab. Boumerdes Ouled Moussa</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><font dir="auto" ><font dir="auto" >Engineering degree in industrial engineering, process engineering, chemical engineering and food engineering</font></font></li><li><font dir="auto" ><font dir="auto" >Experience in the agri-food industry</font></font></li><li><font dir="auto" ><font dir="auto" >My computer skills: Office software and Microsoft Office suite. Previous experience working on an information system is a plus.</font></font></li><li><font dir="auto" ><font dir="auto" >Mastery of Arabic and French</font></font></li><li><font dir="auto" ><font dir="auto" >Action-related quality</font></font></li><li><font dir="auto" ><font dir="auto" >Rigour and organisation</font></font></li><li><font dir="auto" ><font dir="auto" >Preventing and managing conflicts or sensitive situations and knowing how to handle emergency situations</font></font></li><li><font dir="auto" ><font dir="auto" >My proficiency with computer tools (Windows Office, or Office 365, etc.)</font></font></li><li><font dir="auto" ><font dir="auto" >Direction of communication av r</font></font></li><li><font dir="auto" ><font dir="auto" >Good team management with a leadership mindset</font></font></li></ul><p></p></section>