وظائف ميكانيكى سفن

<p>Perform preventive and corrective maintenance operations. Diagnose mechanical, hydraulic, and pneumatic failures. Repair or replace defective parts. Perform adjustments and tests after intervention. Check the general condition of vehicles or equipment. Fill out intervention forms and maintenance reports. Ensure compliance with maintenance, quality, and safety procedures.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma in automotive mechanics or equivalent (BT/BTS- Licence, Engineer or Master in mechanics).</li><li>Experience of (02) years in electronic diagnosis of vehicles plus more than 02 years.</li><li>Proficiency in the use of multi-brand scanners and diagnostic software.</li><li>Ability to interpret fault codes, perform troubleshooting, and propose appropriate technical solutions.</li><li>Knowledge of electronic systems and recent automotive technologies.</li></ul>

<p>Perform preventive and corrective maintenance operations. Diagnose mechanical, hydraulic, and pneumatic failures. Repair or replace defective parts. Perform adjustments and tests after intervention. Check the general condition of vehicles or equipment. Fill out intervention forms and maintenance reports. Ensure compliance with maintenance, quality, and safety procedures.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in automotive mechanics or equivalent (BT/BTS- Licence, Engineer or Master in mechanics). Experience of (02) years in electronic diagnosis of vehicles plus more than 02 years. Mastery of the use of multi-brand scanners and diagnostic software. Ability to interpret fault codes, perform troubleshooting, and propose appropriate technical solutions. Knowledge of electronic systems and recent automotive technologies.</p>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Maintain up-to-date technical documentation for equipment. Maintain a register of loans of technical documents temporarily entrusted to user departments. Write descriptive sheets for each type of equipment and ensure they are kept up to date. Maintain a chronological register of equipment entries. Open a technical file for each piece of equipment. Classify and track equipment data. Maintain the equipment allocation schedule. Receive and track equipment availability requests. Prepare equipment transfer slips after approval from your supervisor. Schedule the main planned preventive maintenance operations on the allocation schedule.</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Mechanical or electromechanical technician + training in equipment management. Experience: 5-10 years.</font></font></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Maintenance Supervisor works under the general guidance and supervision of the Maintenance Engineer. This position is responsible to oversees and coordinates to workers in maintaining and repairing electrical, plumbing, ventilation and other outlet requirements to ensure continuity of operations are performed in a safely manner. This role also ensures to maintain adequate inventories of tools, supplies and parts to accurately repair all equipment.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Manage break downs and maintenance to meet the internal customer requirement ensuring.</p><br> <p>Adherence to the defined safety and Quality standards.</p><br> <p>Coordinate the execution of planned preventive maintenance task to ensure equipment's perform as required.</p><br> <p>Review of the equipment deficiencies and take corrective action.</p><br> <p>Execute the planning and execution of the planned maintenance of all outlets equipment to ensure zero downtime of operation.</p><br> <p>Conduct duties in accordance with Standard Operating Procedures as specified in the manufacturer's recommendations and/or Quality System.</p><br> <p>Inspect regularly machinery with respect to safety issues inclusive but not restricted to ground and trip hazards, non-functioning lights, broken pieces along with exposed wiring.</p><br> <p>Implement defined and laid down Safety systems and safe practices of work continually upgrading safety awareness and practices within the team.</p><br> <p>Identify, plan and implement requisite training to ensure continued development of all team members ensuring that an adequately maintained skills inventory is in place.</p><br> <p>Ensure to keep cleanliness at shop and storage areas as well as well-stocked, organized following Company</p><br> <p>color coded program.</p><br> <p>Ensure to maintain adequate inventories of tools, supplies and parts to accurately repair all equipment.</p><br> <p>Ensure compliance to organization’s safety and security standards, procedures and policies.</p><br> <p>Execute the planning and execution of the planned maintenance of all outlets equipment to ensure zero</p><br> <p>downtime of operation.</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Understanding of maintenance procedures, techniques, and best practices across various systems and equipment, including mechanical, electrical, HVAC, plumbing, and building maintenance.</p><br> <p>Ability to diagnose issues, troubleshoot problems, and develop effective solutions to resolve maintenance issues promptly and efficiently.</p><br> <p>Capacity to lead and supervise maintenance teams, delegate tasks, and provide guidance and support to ensure work is completed safely, accurately, and on time.</p><br> <p> Strong communication skills to effectively convey instructions, provide feedback, and liaise with staff, management, contractors, and other stakeholders.</p><br> <p>Experience and proficiency in training maintenance staff on equipment operation, safety procedures, and maintenance best practices.</p><br> <p>Knowledge of preventive maintenance practices and experience in developing and implementing maintenance schedules to minimize downtime and prolong equipment lifespan.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 5 year(s) working experience, 3 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Leadership<br>Resilience<br>Quality<br>Agility<br>Building Maintenance L2<br>Routine Maintenance L2<br>Inspection And Maintenance Procedures L2<br>Preventive Maintenance Procedures L2<br>Service Reports and Logs Maintenance L2<br>AI Fluency<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Mechanical Engineering or Facilities Management Degree<br>Professional Qualification in MMUP Engineer Registration (UPDA) or Facility Management<br><br><br><br> </div>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Design studies related to reinforced concrete buildings. Prepare execution files for construction and resolve errors encountered during verification. Address any outstanding issues to obtain approval of studies from the relevant bodies (such as the CTC). Attend coordination meetings with the project owner and external organizations. Communicate and coordinate internally and externally with the various specialties (Architecture, Civil Engineering, Structural Steelwork, Electrical Engineering, Mechanical and Fluid Engineering, technical building trades).</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">General Education: Engineering degree or Master's degree in Civil Engineering or equivalent. Professional Training: Additional training in the field. Proficiency in specialized software. Proficiency in MS Office tools. Must reside in the Algiers region. If you meet these requirements, please send your CV by clicking on the "Apply" tab for Algiers.</font></font></p>

<p>Define and implement the technical and industrial strategy for furniture production. Supervise the entire manufacturing process: design, planning, production, and quality control. Optimize technical resources, production methods, and industrial performance. Ensure follow-up of technical projects, investments, and innovations. Ensure compliance with quality and safety standards and production deadlines. Supervise technical and production teams. Produce activity reports and propose continuous improvement actions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Engineering degree or equivalent in industrial engineering, mechanical, or production.</li><li>Minimum 5 years of experience in furniture production.</li><li>Proven experience in a similar role.</li><li>Excellent command of manufacturing processes and production tools.</li><li>Skills in team management, leadership, and decision-making.</li><li>Rigor, organizational skills, autonomy, and ability to manage pressure.</li><li>Good command of computer tools and production management software.</li></ul>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Manage the technical studies for HVAC, plumbing, smoke extraction, and fluid networks for EPC projects. Ensure the sizing of installations. Optimize technical solutions and support the construction teams until the works are accepted.</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Minimum education level: Master's degree (Bac+5) in Climate Engineering, Energy Engineering, Thermal Engineering, Fluid Mechanics, Mechanical Engineering with a specialization in HVAC, or a Master's degree in Climate Engineering/Energy Engineering. Experience: Minimum 10 years, including 3 years in the South of France. Project experience: Commercial buildings, hospitals, shopping centers, industrial buildings, and hotels. Technical skills: HVAC, electrical systems, smoke extraction, plumbing, and building management systems (BMS). Architecture and coordination: Ability to read architectural plans, coordinate all trades, and understand building codes. BIM and software: Revit Architecture, Revit MEP, Navisworks, BIM 360, AutoCAD 3D, MS Project, and Microsoft 365. Language: English.</font></font></p>

<p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display proficiency in any one of the following categories, above average skills in two more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Display basic ability to repair or replace PVC copper pipe (including soldering). Troubleshoot and perform basic repair on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related duties. Assist with surface preparation and painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Use the Lockout/Tagout system before performing any maintenance work. Display working knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform mid-level troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers (e.g., Engineer I). Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Experience in general maintenance, exterior and interior surface preparation, and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements.</p>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Ensure the management and optimization of the company's energy performance in order to control consumption, reduce costs, and improve the efficiency of facilities. Develop and implement the company's energy strategy to improve energy performance, reduce consumption, and guarantee optimal resource use. Manage the company's energy operations by monitoring consumption, identifying potential savings, and implementing actions to reduce energy costs. Ensure the monitoring, analysis, and optimization of energy facilities to guarantee their performance, reliability, and availability, while controlling consumption.</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Engineering degree or Master's degree (Bac+5) in energy, electrical engineering, mechanical engineering, electrotechnics, industrial engineering, or a related field. 5-10 years of professional experience in the energy sector, including the operation, maintenance, or management of technical facilities. Experience in an industrial or transportation environment is an asset. Strong understanding of electrical and energy systems and installations. Proficiency in monitoring and analyzing energy consumption. Knowledge of energy optimization and efficiency methods. Knowledge of energy-related standards and regulations.</font></font></p>

<p>Participate in the control and validation of the construction plan. Participate in the formalization of all documents related to testing, commissioning &amp; startup. Participate in monitoring the project execution schedule. Participate in the total physical progress of project activities. Participate in the inspection and testing of project equipment on site. Participate in monitoring hydrostatic tests of collectors and distribution lines and finished product evacuation lines (Gas, Crude, Condensate) on site. Participate in the finalization of project equipment files on site. Participate in controlling the application of instructions from bodies responsible for technical &amp; regulatory controls (DPEM, ARH, CTC, ONML) by the contractor. Participate in controlling the application of the site's HSE procedures. Control the implementation of temporary infrastructures related to construction (camps &amp; work execution means). Ensure surveillance &amp; control of construction &amp; assembly work of industrial installations &amp; reception of equipment.</p><p><strong>Desired Candidate Profile</strong></p><p>State Engineer in Mechanical Engineering or equivalent in (Pipeline, Piping). Proficiency in English is desirable. Experience in the Oil and Gas field.</p>

<p>Manage all production equipment and machinery. Sensitize maintenance personnel to strict adherence to equipment supplier instructions. Manage production facilities and utilities. Develop performance indicators related to maintenance processes. Maintain and repair equipment (electrical, mechanical, hydraulic, pneumatic, electrotechnical, electromechanical). Potentially carry out renovation work on machines, equipment, and installations. Train machine operators on the proper functioning of equipment. Make recommendations for spare parts. Develop and implement a material and equipment coding procedure. Ensure constant verification and maintenance of safety systems (surveillance, theft, fire). Comply with safety regulations in force at the unit. Take charge of and execute any mission assigned by the hierarchical superior, within the scope of the structure's competencies.</p><p><strong>Desired Candidate Profile</strong></p><p>Bac+5 in Industrial Engineering, Maintenance, Electromechanics, or equivalent field. Experience in industrial maintenance, including management experience. Mastery of equipment maintenance, utility management, and spare parts. Good knowledge of CMMS/ERP tools, maintenance KPIs, and QHSE standards (ISO 22716 is an asset). Leadership, organizational skills, rigor, and ability to manage teams and projects.</p>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Manage the technical monitoring of HVAC, plumbing, smoke extraction, and fluid network work for EPC projects. Ensure the sizing of installations. Optimize technical solutions and support the work teams until project handover. Ensure the technical, operational, and documentary monitoring of the installation work for Heating, Ventilation, and Air Conditioning (HVAC), sanitary plumbing, hydraulic networks, gas, and smoke extraction. Produce execution documents. Provide technical support to the implementation teams under the supervision of the Senior Fluid/HVAC Design Engineer or the Project Manager.</font></font></p><p><strong>Desired Candidate Profile</strong></p><h2><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Minimum level: Master's degree (Bac +5)</font></font></h2> <p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Accepted qualifications:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> Climate Engineering degree. Energy Engineering degree. Thermal Engineering degree. Fluids Engineering degree. Mechanical Engineering degree (HVAC specialization). Master's degree in Climate Engineering or Energy Engineering.</font></font></p> <p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Minimum requirement:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> 3-5 years / South</font></font></p> <p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Desired experience:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> Tertiary projects, Hospitals, Shopping centers, Industrial buildings, Hotels.</font></font></p> <p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Architecture:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> Reading architectural plans. Coordination of all trades. Construction standards.</font></font></p> <p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Technical aspects:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> HVAC. Electrical/Low Voltage. Smoke extraction. Plumbing. Building Management Systems.</font></font></p> <p><strong>BIM :</strong> Revit Architecture. Revit MEP. Navisworks. BIM 360. AutoCAD 3D. Navisworks. MS Project. Microsoft 365.</p> <p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Language:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> English / French</font></font></p>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Analyze the project specifications, requirements document, and client requirements. Take ownership of the project and establish the overall project schedule. Manage the finalization of studies and technical preparation. Coordinate the design, purchasing, production, subcontracting, and assembly teams. Monitor progress, deadlines, costs, and quality. Identify risks and implement corrective actions. Ensure communication and follow-up with the client. Coordinate supplies and subcontracting services. Organize delivery, installation, and commissioning. Ensure project acceptance and resolution of any outstanding issues. Objective: Guarantee the successful completion of projects in compliance with technical requirements, deadlines, costs, and quality standards, up to commissioning and client satisfaction.</font></font></p><p><br></p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Engineer/Master's degree in mechanical, industrial, electromechanical engineering, or a related field. Experience in industrial project management, ideally in the cement industry. Sound knowledge of the cement plant environment and bulk material handling. Proficiency in team management, project planning, and monitoring. Excellent interpersonal skills and ability to communicate effectively with clients and various stakeholders. Autonomous, rigorous, proactive, and responsible. Tools: MS Project: planning and monitoring. AutoCAD/SolidWorks: reading and understanding technical specifications. Odoo/ERP: business and purchasing tracking. Excel: tracking and reporting. Knowledge of the SCOBULK SYSTEMS environment and solutions is a significant asset.</font></font></p>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">International Supplier Management: Identify and select international suppliers of industrial equipment. Ensure technical and commercial exchanges with suppliers. Organize follow-up meetings (in person and remotely). Develop lasting relationships with foreign partners. Equipment Procurement Management: Participate in the development of specifications (URS) with the technical teams. Launch international tenders. Compare technical and financial offers. Participate in commercial and contractual negotiations. Prepare supplier selection recommendations. Project Monitoring: Ensure the monitoring of equipment manufacturing. Monitor compliance with the contractual schedule. Track progress with suppliers. Participate in Design Reviews. Organize and monitor Factory Acceptance Tests (FAT). Monitor Site Acceptance Tests (SAT) until final acceptance. Document Management: Verify the conformity of supplier documents: Ensure document archiving. Logistics Coordination: Track international shipments. Coordinate with the procurement department. Ensure customs clearance operations are followed up. Coordinate deliveries with internal teams. Internal Coordination: Collaborate with: Production, Maintenance, Quality Assurance, Qualification &amp; Validation, Engineering, Procurement, Finance, General Management. Contract Management: Ensure compliance with contractual obligations. Monitor warranties. Manage supplier claims. Implement contractual penalties when necessary. Monitor contract amendments. Technology Watch: Identify new equipment manufacturers. Participate in international trade shows. Monitor new technologies and regulatory developments.</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Master's degree (Bac+5) in Industrial Engineering, Process Engineering, Mechanical Engineering, International Business, Purchasing or equivalent. Experience in a similar position.</font></font></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Le Méridien, we are inspired by the era of glamorous travel, celebrating each culture through the distinctly European spirit of savouring the good life. Our guests are curious and creative, cosmopolitan culture seekers that appreciate moments of connection and slowing down to savour the destination. We provide authentic, chic and memorable service along with experiences that inspire guests to savour the good life. We’re looking for curious and creative people to join our team. If you appreciate connecting with like-minded guests and have a deep desire to create memorable experiences, we invite you to explore career opportunities with Le Méridien. In joining Le Méridien, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Plan, coordinate, and conduct regulatory inspections of pressure equipment (PE). Analyze and interpret inspection results and formulate appropriate technical recommendations. Participate in regulatory compliance projects related to the integrity of industrial facilities. Coordinate and contribute to Risk-Based Inspection (RBI) studies in accordance with API 580 and API 581 standards. Prepare the technical documentation required for ISO 17020 certification and ALGERAC accreditation. Ensure compliance with applicable national and international codes, standards, and regulations. Develop technical reports and monitor corrective action plans.</font></font></p><p><strong>Desired Candidate Profile</strong></p><h2>Formation</h2><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Master's degree in Mechanical Engineering, Petrochemical Engineering, Metallurgy or in an equivalent technical discipline.</font></font></p><h2><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Experience</font></font></h2><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Minimum 5 years of experience in pressure equipment inspection and integrity, ideally in the Oil &amp; Gas sector. Proven experience in regulatory inspections of pressure equipment in accordance with Algerian standards, codes, and regulations. Experience in coordinating regulatory compliance projects and RBI studies. Experience in technical preparation for ISO 17020 certification and ALGERAC accreditation.</font></font></p><h2><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Technical skills</font></font></h2><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Proficiency in API 510, API 580, and API 581 standards. Sound knowledge of codes, standards, and regulations applicable to the industrial and petroleum sectors. Ability to analyze inspection data and manage risks. Proficiency in office software and technical report writing.</font></font></p><h2><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">LANGUAGES</font></font></h2><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Proficient in Arabic, French and English (spoken and written).</font></font></p><h2><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Strengths</font></font></h2><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">API certifications (API 510, API 580 or equivalent). ISO 17020 training or certification. Knowledge of ALGERAC accreditation requirements.</font></font></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Rig Liaisonman acts as the primary link between the drilling rig site, the Drilling &amp; Technical Department (DTD), Saudi Aramco representatives, and the contractor.<br> The position is responsible for coordinating rig activities, monitoring operational performance, ensuring compliance with approved drilling programs and Saudi Aramco requirements, and facilitating timely communication and resolution of operational issues.<br> Key Responsibilities Serve as the main liaison between the rig site, DTD, Saudi Aramco representatives, and drilling contractors.<br> Coordinate daily drilling and rig-related activities with relevant departments and stakeholders.<br> Monitor rig operations to ensure compliance with approved drilling programs, procedures, safety standards, and client requirements.<br> Review and communicate daily drilling reports, operational updates, equipment status, and performance information.<br> Follow up on rig activities, operational challenges, equipment issues, and required corrective actions.<br> Coordinate with drilling engineers, rig management, wellsite supervisors, service companies, and other stakeholders.<br> Escalate operational, technical, safety, and schedule-related issues to the appropriate DTD personnel.<br> Assist in ensuring that drilling operations remain aligned with the approved program and project schedule.<br> Track the status of rig moves, rig readiness, equipment availability, maintenance requirements, and operational priorities.<br> Support coordination of logistics, materials, personnel, services, and other resources required for rig operations.<br> Participate in meetings, operational reviews, coordination meetings, and incident investigations when required.<br> Maintain accurate records and provide regular updates to DTD management.<br> Bachelor’s degree or diploma in Drilling Engineering, Petroleum Engineering, Mechanical Engineering, or a related discipline ; or equivalent relevant experience.<br> Typically 8–15 years of experience in drilling and rig operations , preferably in the oil and gas industry.<br> Previous experience working with Saudi Aramco operations or Saudi Aramco-approved contractors is highly preferred.<br> Strong knowledge of land rig operations, drilling activities, wellsite coordination, and oilfield services.<br> Experience liaising with drilling contractors, service companies, client representatives, and technical departments.<br> Familiarity with Saudi Aramco safety, operational, and reporting requirements.<br></span> </div>