Skilled laborers Jobs in Algeria

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Install, maintain, and troubleshoot industrial electrical systems (machines, equipment, electrical panels). Perform regular checks and diagnostics of electrical faults. Ensure compliance of installations with safety standards. Respond to faults and carry out repairs within the given deadlines.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Competence in electrical diagnostics and troubleshooting. Mastery of electrical and industrial safety standards. If you match this profile, please send your CV by clicking on the 'Apply' tab Relizane.</p><p></p></section>

<p><font dir="auto" ><font dir="auto" >Ensure the installation, maintenance, and troubleshooting of the hotel's electrical systems. Diagnose electrical faults and carry out necessary repairs. Perform preventive and corrective maintenance on electrical equipment. Check the proper functioning of electrical panels, lighting, and distribution systems. Ensure compliance with electrical safety standards and current procedures. Conduct regular checks to prevent malfunctions.</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" ><font dir="auto" >Diploma or qualification in electricity or electrotechnics. Minimum 3 years' professional experience in a similar position. Good knowledge of low-voltage electrical installations and technical equipment. Rigorous, autonomous, organized, and a team player.</font></font></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The main mission of the kitchen and laundry equipment technician is to ensure the availability, proper functioning, and safety of the hotel's technical installations related to food production and refrigerated storage. He/She will work on kitchen equipment (cooking, preparation, washing/dishwashing), laundry/linen, and especially cold rooms (positive/negative cold, evaporators, regulation, defrosting, alarms). He/She will carry out preventive checks and maintenance, ensure corrective maintenance and troubleshooting in compliance with maintenance plans, internal procedures, and hygiene requirements (cold chain, food safety). In case of anomaly (breakdown, temperature drift, alarm, regulation fault), he/she will apply safety procedures, rapid reaction, lockout if necessary, and will alert the manager, while ensuring the traceability of interventions and equipment compliance.</p><p>Main Missions:</p><ul><li>Carry out checks on the proper functioning of kitchen equipment and associated areas (depending on scope: professional washing/dishwashing, production equipment, ventilation/extraction if applicable).</li><li>Ensure daily/scheduled monitoring of cold rooms and refrigerators: temperature checks, alarms, defrosting (if applicable), general condition of units.</li><li>Check and adjust refrigeration systems according to procedures: regulation, thermostats/probes, controls, valves (depending on site), air circulation, condition of evaporators and condensers.</li><li>Diagnose breakdowns (symptoms, alarms, regulation faults, cold loss) and propose/implement actions in accordance with authorization level.</li><li>Perform preventive maintenance: technical cleaning (depending on areas), checks, inspections, safety verifications, intervention planning.</li><li>Execute corrective maintenance: replacement of wear parts (with authorization), recommissioning, validation tests.</li><li>Participate in interventions with service providers (refrigeration, electricity, gas, automation) and provide a clear technical report.</li><li>Ensure strict compliance with the cold chain: safety measures in case of drift, immediate alert, organization of continuity if applicable according to internal procedures.</li><li>Apply food hygiene rules and internal procedures (areas, cleaning, production plan constraints).</li><li>Comply with electrical/mechanical safety rules and workplace safety (lockout if necessary, PPE, signage).</li><li>Ensure traceability: drafting of work orders, reports, readings (temperatures/checks), parts/consumables tracking.</li><li>Keep preventive actions and reporting up to date.</li><li>Participate in internal audits / quality controls and preparation for verifications.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Profile Required:</h2><p>Technician Diploma / BTS in Industrial Maintenance, Electrotechnics, Refrigeration and Air Conditioning, or equivalent.</p><p>2 to 5 years of experience in maintenance of catering/institutional equipment and/or commercial refrigeration (ideally in a hotel environment).</p><p>Solid knowledge in maintenance and diagnostics (electrical, basic mechanical, regulation).</p><p>Knowledge or mastery of commercial refrigeration: temperature regulation, probes, evaporators/condensers, defrosting, alarms, performance notions.</p><p>Ability to intervene on kitchen/institutional equipment (production, professional washing/dishwashing if applicable).</p><p>Proficiency with control instruments (multimeter according to authorizations, thermometers/probes, reading alarms and regulation).</p><p>Ability to read technical manuals, schematics, and simple plans.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Kitchen and Laundry Equipment Maintenance Technician is primarily responsible for ensuring the availability, proper functioning, and safety of the hotel's technical installations related to food production and refrigerated storage. They will work on kitchen equipment (cooking, preparation, washing/dishwashing), laundry/linen, and especially cold rooms (positive/negative cold, evaporators, regulation, defrosting, alarms). They will perform checks and preventive maintenance, ensure corrective maintenance and troubleshooting in compliance with maintenance plans, internal procedures, and hygiene requirements (cold chain, food safety). In case of anomalies (breakdown, temperature drift, alarm, regulation fault), they will apply safety procedures, rapid reaction, lockout/tagout if necessary, and alert the supervisor, while ensuring the traceability of interventions and equipment compliance.</p><p><strong>Main Missions:</strong></p><ul><li>Perform functional checks of kitchen equipment and associated areas (scope: professional dishwashing, production equipment, ventilation/extraction if applicable).</li><li>Ensure daily/scheduled monitoring of cold rooms and refrigerators: temperature checks, alarms, defrosting (if applicable), general unit status.</li><li>Verify and adjust refrigeration systems according to procedures: regulation, thermostats/probes, controls, valves (site-dependent), air circulation, status of evaporators and condensers.</li><li>Diagnose faults (symptoms, alarms, regulation faults, loss of cold) and propose/implement actions in accordance with authorization level.</li><li>Perform preventive maintenance: technical cleaning (area-dependent), checks, inspections, safety verifications, intervention planning.</li><li>Execute corrective maintenance: replacement of wear parts (with authorization), recommissioning, validation tests.</li><li>Participate in interventions with service providers (refrigeration, electrical, gas, automation) and provide a clear technical report.</li><li>Ensure strict adherence to the cold chain: safety measures in case of drift, immediate alert, organization of continuity if applicable according to internal procedures.</li><li>Apply food hygiene rules and internal procedures (areas, cleaning, production plan constraints).</li><li>Comply with electrical/mechanical safety rules and workplace safety (lockout/tagout if necessary, PPE, signaling).</li><li>Ensure traceability: drafting intervention reports, summaries, readings (temperatures/checks), parts/consumables tracking.</li><li>Keep preventive actions and reporting up to date.</li><li>Participate in internal audits / quality controls and preparation for verifications.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Technician / BTS diploma in industrial maintenance, electrotechnics, refrigeration and air conditioning, or equivalent.</li><li>2 to 5 years of experience in maintenance of catering/institutional equipment and/or commercial refrigeration (ideally in a hotel environment).</li><li>Solid knowledge in maintenance and diagnostics (electrical, basic mechanical, regulation).</li><li>Basic knowledge or mastery of commercial refrigeration: temperature regulation, probes, evaporators/condensers, defrosting, alarms, performance notions.</li><li>Ability to intervene on kitchen/institutional equipment (production, professional dishwashing if applicable).</li><li>Proficiency with control instruments (multimeter according to authorizations, thermometers/probes, reading alarms and regulation).</li><li>Ability to read technical notices, diagrams, and simple plans.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>SUMMARY OF THE ROLE</span></p><br>Join our Dynamic as an Instrumentation technician you will be responsible for executing maintenance works of all assets related to the Operations as delegated by your line Manager in line with Group Maintenance Guidelines, Procedures, and HSEQ Management System.&nbsp;<br>This position is based in Freha Factory, and reports to the Maintenance Planner.<p>Responsibilities:</p><br><ul><li><p>Execute preventive, corrective, and predictive maintenance activities in accordance with established maintenance standards, procedures, and safety requirements to ensure optimal equipment performance and reliability.&nbsp;</p><br></li><li><p>Diagnose equipment faults and perform timely repairs or replacement of defective components, parts, and systems to minimize downtime and maintain operational efficiency.&nbsp;</p><br></li><li><p>Support the continuous operation, reliability, and quality performance of production equipment, utilities, and facility assets.&nbsp;</p><br></li><li><p>Adhere to and promote 5S workplace organization standards to maintain a safe, clean, and efficient working environment.&nbsp;</p><br></li><li><p>Evaluate maintenance inspection findings, identify corrective actions, and develop effective plans to close identified gaps and prevent recurrence.&nbsp;</p><br></li><li><p>Contribute to continuous improvement initiatives aimed at enhancing equipment reliability, maintenance effectiveness, and operational performance.&nbsp;</p><br></li></ul><br><p><span>WHAT WE ARE LOOKING FOR AND WHAT WE OFFER</span></p><br><p><span><span><b>We are looking for:</b></span></span></p><br><ul><li><span><span>Instrumentation University degree.</span></span></li><li><span><span>Between 02 to 04 years of relevant experience.</span></span></li><li><span><span>Proficient in communicating in English Language (Both written and verbal).</span></span></li></ul><p><span><span><b>we offer:</b></span></span></p><br><ul><li><span><span>Competitive compensation and benefits</span></span></li><li><span><span>Continuous learning opportunities and training activities through on-the-job training and our in-house learning Jotun Academy.</span></span></li><li><span><span>Career development opportunities across multiple disciplines and geographies</span></span></li><li><span><span>Leaders who focus on engaging and enabling their team, proven by consistently high employee feedback scores</span></span></li><li><span><span>A supportive and inclusive company culture where you can be your authentic self</span></span></li><li><span><span>A focus on having fun together through team buildings and social activities.</span></span></li></ul><p><span><span><b>Competencies for this Position:</b></span></span></p><br><p><b>Effective communication: </b>communicates in a clear, precise and structured way; speaks with authority and conviction; presents effectively.</p><br><p><b>Execution:</b> adheres to company rules and procedures; executes plans with commitment and determination; achieves high quality results.</p><br><p><b>Professional expertise</b>: demonstrates specialist knowledge and expertise in own area; participates in continuous professional development.</p><br><p><b>Constructive teamwork</b> co-operates well with others; shares knowledge, experience and information; supports others in the pursuit of team goals</p><br><p><br><span><b>POSITION INFORMATION</b></span></p><br><p><b>Company:</b></p><br>Jotun Technover P SPA<p><br><b>Contract Type:</b></p><br>Regular<p><b>Time Type:</b></p><br>Full time<p><span><b>CLOSING DATE (dd.mm.yyyy):</b></span></p><br>17.08.2026<p><span>WHO WE ARE</span></p><br>Jotun’s story in the MEIA region (Middle East, India and Africa) began in 1962, and has grown to include 18 legal entities committed to achieving success and growth of the Jotun Group. Throughout our history, we have focused on providing our employees with meaningful and challenging work, rewarding them through continued learning and development, underpinned by our values of Loyalty, Care, Respect and Boldness.Jotun Algeria established in 2011, is one of the key markets within the MEIA region. With a production facility Jotun Technover P SPA since 2022 and a rapidly growing team with 1 production facility, 2 warehouses and more than 100 employees, we aim to further strengthen Jotun’s position in Algeria through ambitious market growth plans that focus on innovation, efficiency and profitability.<p>Visit our Career Page to know more about life at Jotun.</p><br><p>Jotun’s company culture welcomes and values differences in people. Our more than 10,200 employees on all continents represent 90 nationalities, four generations and diversity of professions, gender, abilities, ethnicities, beliefs, cultures etc. We are committed to represent the societies we operate in, promoting equality, equity and zero-tolerance for discrimination.</p><br><p>If you are applying to a position and require any additional support in the interview process, please let us know how we can accommodate this. &nbsp;</p><br><p>If you think that this role is what you could be doing next, apply now!</p><br> </div>

<p>Assurer la maintenance préventive et corrective des machines de production. Diagnostiquer les pannes électriques, mécaniques et électromécaniques. Superviser les interventions techniques. Veiller au bon fonctionnement des équipements de production. Participer à l'amélioration des performances des machines. Assurer le suivi des pièces de rechange et des interventions.</p><p><strong>Desired Candidate Profile</strong></p><p>Diplôme d'Ingénieur / Master en électromécanique ou domaine similaire. Expérience en maintenance industrielle souhaitée. Bonne connaissance des équipements électromécaniques. Rigueur, réactivité et capacité à résoudre les problèmes techniques.</p>

<p>Install and commission refrigeration and air conditioning equipment. Ensure preventive and corrective maintenance. Diagnose faults and carry out repairs. Control the proper functioning of installations. Comply with safety standards and technical procedures.</p><p><strong>Desired Candidate Profile</strong></p><p>Level of study: Bac+2 BTS/TS in Refrigeration and Air Conditioning. Professional experience. Autonomy, responsiveness, and team spirit.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Perform and carry out on-site technical missions (installation, maintenance, diagnostics). Work in the workshop for equipment repair, configuration, and preparation. Participate in complex or critical interventions. Provide technical support. Manage technical emergencies and prepare intervention reports. Install and configure equipment on-site. Perform commissioning tests. Work on a variety of tasks. Write detailed intervention reports.</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><font dir="auto" ><font dir="auto" >Basic Education Diploma: Higher Technician Diploma or Bac+2/3 in Technology, Computer Science, Electronics, Electrotechnics, or a similar field. Professional Experience: Training in preventive and corrective maintenance; Training in the repair of electronic and computer equipment; Reading technical diagrams; Diagnosis and troubleshooting; Installation and configuration of equipment; Use of measuring tools and technical software; Writing technical reports; Rigor and sense of responsibility; Team spirit; Responsiveness and autonomy; Discipline and adherence to procedures; Good communication with clients and colleagues; Availability for on-site visits. Experience: Minimum 1-3 years in after-sales service, maintenance, or a similar field.</font></font></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Stage digitalisation de contrôle qualité dans l'aéronautique F/H </p><br><br><p>Stage</p><br><br><p>4 à 6 mois</p><br><br><p>Etudiant</p><br><br><p>Temps complet</p><br><br><p>Contexte :<br>Dans le cadre de sa démarche d'innovation et d'amélioration continue, Safran Nacelles explore la digitalisation et l'automatisation des contrôles qualité. La robustesse et la fiabilité des inspections visuelles étant un enjeu majeur dans l'industrie aéronautique, nous cherchons à évaluer l'apport d'outils numériques pour renforcer la détection des défauts sur nos pièces.<br>Mission :<br>Au sein de la Direction Qualité et en lien avec les équipes méthodes et production, vous serez chargé(e) de :<br>• Prendre en main les outils de contrôle visuel digitalisé déjà en place (caméras intelligentes, logiciels de vision industrielle). <br>• Mettre en place une méthodologie de test comparative entre le contrôle visuel humain et les outils digitaux sélectionnés. <br>• Identifier des applications possibles des outils, puis réaliser des essais sur pièces de production ou prototypes, collecter et analyser les données de performance (fiabilité, répétabilité, rapidité, types de défauts détectés).<br>• Mettre l'outil en utilisation série et former les compagnons/inspecteurs à l'utilisation des outils<br>• Proposer des axes d'amélioration, contribuer à l'adaptation des outils aux besoins spécifiques des contrôles aéronautiques.<br>• Synthétiser les résultats et formuler des recommandations sur la pertinence de déployer ces solutions dans nos ateliers.<br>• Présenter vos travaux devant les équipes pluridisciplinaires.<br>• Collaborer avec les équipes centrales pour transversaliser les meilleures pratiques. </p><br><br><p>Intégrer un grand groupe innovant et leader sur ses marchés.<br>Participer à un projet stratégique mêlant aéronautique, digitalisation et technologie de pointe.<br>Évoluer dans un environnement stimulant avec un accompagnement technique. </p><br><br><p>Étudiant(e) en Bac+4/5 école d'ingénieurs ou équivalent, avec spécialisation en génie industriel, qualité, automatisme.<br>Intérêt pour l'innovation, l'industrie 4.0, et les nouvelles technologies.<br>Connaissances de base en vision industrielle, traitement d'image, méthodes qualité.<br>Ce poste s'adresse à un candidat curieux, rigoureux et analytique, capable de faire preuve d'initiative. La mission comporte une forte dimension terrain avec un contact privilégié auprès des opérateurs.</p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Join a hotel that's part of the Accor network, a group that brings together more than 5,500 hotels, 10,000 restaurants, and lifestyle destinations in 110 countries. Here, we believe in you and what you bring to the table. Opportunities for growth and development abound. Every project, every action contributes to creating a positive and memorable impact for our guests, our colleagues, and our planet. Together, we embody the vision of responsible hospitality. Become a Heartist, and let your heart guide you in this world where life beats stronger.</font></font></p><p><font dir="auto" ><font dir="auto" >The aquatic equipment maintenance technician's main mission is to ensure the proper functioning and sanitary safety of the pools (seawater and thermal water). They ensure that the water constantly meets the required physicochemical and microbiological criteria by applying filtration, disinfection, and treatment protocols. They perform daily checks (pH, temperature, disinfectant, turbidity), verify and adjust the equipment (pumps, filters, dosing systems, valves, controls), carry out first-level maintenance operations (cleaning, backwashing/regeneration, monitoring of consumables), and ensure that the pools are ready for opening for treatments. In case of an anomaly (parameter deviation, alarms, breakdowns), he/She applies the procedures for securing, locking out and alerting the person in charge, while strictly respecting the rules of hygiene, chemical safety and the traceability of controls.</font></font></p><p><font dir="auto" ><font dir="auto" >Main Missions:</font></font></p><ul><li><font dir="auto" ><font dir="auto" >Carry out daily water quality checks (pH, disinfectant, temperature, turbidity according to the procedures imposed by the manager and according to the standards).</font></font></li><li><font dir="auto" ><font dir="auto" >Check the operation of the filtration/treatment equipment (pumps, filters, flow rate, valves, dosers, regulation).</font></font></li><li><font dir="auto" ><font dir="auto" >Adjust treatment parameters according to internal guidelines (pH correction, disinfectant dosage, balancing)</font></font></li><li><font dir="auto" ><font dir="auto" >Ensure disinfection and treatment effectiveness according to the establishment's protocol.</font></font></li><li><font dir="auto" ><font dir="auto" >Carry out the filtration operations (backwashing/regeneration) according to the maintenance plan.</font></font></li><li><font dir="auto" ><font dir="auto" >Control and maintain the circulation and good homogeneity of the water in the basins.</font></font></li><li><font dir="auto" ><font dir="auto" >Carry out the cleaning of the pools (bottoms, walls, gutters/skimmers, vacuuming/collecting according to equipment).</font></font></li><li><font dir="auto" ><font dir="auto" >Maintain the areas and associated equipment (cleaning equipment, grates, drains, technical rooms according to internal rules).</font></font></li><li><font dir="auto" ><font dir="auto" >Monitor the availability of treatment pools (water compliant before opening).</font></font></li><li><font dir="auto" ><font dir="auto" >Detect anomalies (non-compliance of water parameters, alarms, breakdowns) and apply the procedure: alert, safety measures, lockout/tagout.</font></font></li><li><font dir="auto" ><font dir="auto" >Replace consumables / perform first-level maintenance (if within the defined scope).</font></font></li><li><font dir="auto" ><font dir="auto" >Clean and inspect accessible parts of treatment and filtration systems.</font></font></li><li><font dir="auto" ><font dir="auto" >Participate in troubleshooting in case of failure and transmit the information to the maintenance/technical department.</font></font></li><li><font dir="auto" ><font dir="auto" >Ensuring chemical safety: storage, handling of products, compliance with PPE and instructions.</font></font></li><li><font dir="auto" ><font dir="auto" >Respect hygiene rules and risk prevention measures (heat, humidity, chemicals, electrical risks).</font></font></li><li><font dir="auto" ><font dir="auto" >Keep records and tracking (tracking books, logs, quality/control documents).</font></font></li><li><font dir="auto" ><font dir="auto" >Participate in internal audits/controls and the preparation of regulatory checks.</font></font></li><li><font dir="auto" ><font dir="auto" >Respect internal procedures and control deadlines (planned frequencies).</font></font></li><li><font dir="auto" ><font dir="auto" >Alert the person in charge in case of repeated deviations or situations not covered by the instructions.</font></font></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><font dir="auto" ><font dir="auto" >Technician / BTS M water treatment, Industrial Maintenance or equivalent.</font></font></li><li><font dir="auto" ><font dir="auto" >2-5 years experience in swimming pools, ideally in a hotel (Luxury/Thalasso), hospital or thermal environment.</font></font></li><li><font dir="auto" ><font dir="auto" >Mastery of water treatment processes (physico-chemical, filtration, disinfection).</font></font></li><li><font dir="auto" ><font dir="auto" >Mastery of measurement tools, water quality control (pH, TH, chlorine) and health risks (Lionellosis).</font></font></li><li><font dir="auto" ><font dir="auto" >Knowledge of the specific constraints related to seawater (corrosion, salinity, etc.).</font></font></li><li><font dir="auto" ><font dir="auto" >Ability to read technical plans, hydraulic diagrams and manage emergencies with responsiveness.</font></font></li><li><font dir="auto" ><font dir="auto" >Absolute mastery of chemical and biological safety rules.</font></font></li></ul><p></p></section>

<p>Clean and disinfect offices, sanitary facilities, and common areas. Use appropriate cleaning products and equipment. Empty trash cans and ensure waste sorting. Replenish consumables (soap, paper, etc.). Report any anomalies or maintenance needs. Respect hygiene and safety instructions, and company procedures.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience of at least 1 year in a similar role. Good physical condition. Sense of organization, rigor, and punctuality.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The aquatic equipment maintenance technician's main mission is to ensure the proper functioning and sanitary safety of the pools (seawater and thermal water). He/She ensures that the water constantly meets the required physico-chemical and microbiological criteria, by applying filtration, disinfection, and treatment protocols. He/She performs daily checks (pH, temperature, disinfectant, turbidity), verifies and adjusts equipment (pumps, filters, dosers, valves, regulation), carries out first-level maintenance operations (cleaning, backwashing/regeneration, consumables monitoring) and ensures that the pools are ready for opening for treatments. In case of anomaly (parameter drift, alarms, breakdowns), He/She applies safety, lockout, and alert procedures to the manager, while strictly respecting hygiene rules, chemical safety, and control traceability.</p><p>Main Missions:</p><ul><li>Perform daily checks of water quality (pH, disinfectant, temperature, turbidity according to procedures imposed by his/her manager and according to standards).</li><li>Verify the operation of filtration/treatment equipment (pumps, filters, flow rate, valves, dosers, regulation).</li><li>Adjust treatment parameters in accordance with internal instructions (pH correction, disinfectant dosage, balancing).</li><li>Ensure disinfection and treatment effectiveness according to the establishment's protocol.</li><li>Perform filtration operations (backwashing/regeneration) according to the maintenance plan.</li><li>Control and maintain water circulation and homogeneity in the pools.</li><li>Perform pool cleaning (bottoms, walls, gutters/skimmers, suction/collection according to equipment).</li><li>Maintain associated areas and equipment (cleaning materials, grilles, drains, technical rooms according to internal rules).</li><li>Monitor pool availability for treatments (compliant water before opening).</li><li>Detect anomalies (non-compliance of water parameters, alarms, breakdowns) and apply the procedure: alert, safety, lockout.</li><li>Replace consumables / perform first-level maintenance (if within the defined scope).</li><li>Clean and check accessible parts of treatment and filtration systems.</li><li>Participate in diagnostics in case of breakdown and transmit information to the maintenance/technical department.</li><li>Ensure chemical safety: storage, handling of products, respect of PPE and instructions.</li><li>Respect hygiene and risk prevention rules (heat, humidity, chemicals, electrical risks).</li><li>Maintain records and traceability (monitoring notebooks, logs, quality/control documents).</li><li>Participate in internal audits/controls and preparation for regulatory checks.</li><li>Respect internal procedures and control deadlines (planned frequencies).</li><li>Alert the manager in case of repeated drift or situation not covered by instructions.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Technician / BTS in Water Trades, Industrial Maintenance or equivalent.</li><li>2 to 5 years of experience in swimming pools, ideally in a hotel environment (Luxury/Thalasso), hospital or thermal.</li><li>Mastery of water treatment processes (physico-chemical, filtration, disinfection).</li><li>Mastery of measurement tools, water quality control (pH, TH, chlorine) and health risks (legionellosis).</li><li>Knowledge of specific constraints related to seawater (corrosion, salinity, etc.).</li><li>Ability to read technical plans, hydraulic diagrams and manage emergencies with responsiveness.</li><li>Absolute mastery of chemical and biological safety rules.</li></ul><p></p></section>

<ul> <li><font dir="auto" ><font dir="auto" >Provide first and second level technical support to users.</font></font></li> <li><font dir="auto" ><font dir="auto" >Install, configure and maintain workstations, printers and peripherals.</font></font></li> <li><font dir="auto" ><font dir="auto" >Diagnose and resolve hardware, software and network incidents.</font></font></li> <li><font dir="auto" ><font dir="auto" >Ensure the deployment and support of third-party business software (ERP, Sage, Microsoft Office, etc.).</font></font></li> <li><font dir="auto" ><font dir="auto" >Manage user accounts, access rights and computer equipment.</font></font></li> <li><font dir="auto" ><font dir="auto" >Write up the technical procedures and ensure the reporting of interventions.</font></font></li> </ul> <ul> <li><font dir="auto" ><font dir="auto" >Advanced Technician Diploma, Bachelor's Degree or Engineering Degree in Computer Science.</font></font></li> <li><font dir="auto" ><font dir="auto" >Desired experience in IT support.</font></font></li> <li><font dir="auto" ><font dir="auto" >Good mastery of Windows systems and Microsoft Office.</font></font></li> <li><font dir="auto" ><font dir="auto" >Good organizational skills, analytical mind and responsiveness.</font></font></li> <li><font dir="auto" ><font dir="auto" >Good interpersonal skills and ability to work in a team.</font></font></li> </ul> <p> <b><font dir="auto" ><font dir="auto" >If you match these profiles, please send your CV by clicking</font></font></b> </p> <p> <b><font dir="auto" ><font dir="auto" >on the apply tab</font></font></b> </p> Alger Zeralda

<p><font dir="auto" ><font dir="auto" >Perform preventive and corrective maintenance on production equipment and machinery. Diagnose malfunctions and intervene quickly to ensure continuous production. Carry out maintenance, adjustment, repair, and troubleshooting operations. Work on mechanical, electrical, pneumatic, hydraulic, and automated systems. Participate in the installation and commissioning of new equipment. Monitor the maintenance schedule and document completed interventions. Identify spare parts needs and track their availability. Ensure the proper functioning and availability of production equipment. Propose improvement actions to reduce downtime and breakdowns.</font></font></p><p><strong>Desired Candidate Profile</strong></p><h2><font dir="auto" ><font dir="auto" >Training:</font></font></h2><font dir="auto" ><font dir="auto" >TS/BTS in Industrial Maintenance, Electromechanics, Electrotechnics, Automation or Industrial Engineering. Engineer profiles in Industrial Maintenance / Industrial Engineering are also accepted.</font></font><br><h2><font dir="auto" ><font dir="auto" >Experience :</font></font></h2><font dir="auto" ><font dir="auto" >Minimum 2-5 years experience in an industrial environment, ideally in a production unit. Good knowledge of industrial production machinery and equipment.</font></font><br><h2><font dir="auto" ><font dir="auto" >DESIRED QUALITIES:</font></font></h2><font dir="auto" ><font dir="auto" >Analytical skills and ability to diagnose breakdowns; </font></font><br><font dir="auto" ><font dir="auto" >Autonomy and responsiveness; </font></font><br><font dir="auto" ><font dir="auto" >Sense of responsibility; </font></font><br><font dir="auto" ><font dir="auto" >Rigor and organization; </font></font><br><font dir="auto" ><font dir="auto" >Team spirit; </font></font><br><font dir="auto" ><font dir="auto" >Good ability to work in an industrial and production environment.</font></font>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The QA/QC Manager is responsible for leading and managing the Quality Control and Quality Assurance functions of the assigned location working closely with the head of operations and other functional managers to ensure that products meet or exceed customer expectations, and that quality and compliance standards are met. The position holder will also develop and implement quality control plans and procedures and will manage a team of Quality Control and Quality Assurance professionals.</p><br><br><br><u><b>Job Responsibilities 1</b></u> <br><p>Enforces the implementation of quality control plans and procedures to ensure compliance with industry standards, customer requirements, and regulatory requirements.</p><br> <p>Ensures that all products delivered meet or exceed customer expectations, and that quality and compliance standards are met.</p><br> <p>Conducts regular quality audits to ensure compliance with quality standards and procedures.</p><br> <p>Works closely with all functional managers to identify and resolve quality issues, and to continuously improve product quality.</p><br> <p>Manages the non-conformance and corrective action process, ensuring timely and effective resolution of quality issues.</p><br> <p>Ensure that all quality documentation is accurate, complete, and up-to-date, and that it is stored and maintained in an appropriate manner.</p><br> <p>Develop and deliver quality training programs to ensure that all employees are aware of quality standards and procedures.</p><br> <p>Supervises all QA/QC plans as well as amendments and revisions in order to meet the project quality requirements and client’s expectations.</p><br> <p>Establishes project quality objectives in line with IMS corporate objectives and ensure to monitor submittals of QA/QC reports.</p><br> <p>Builds and implements a control system for suppliers and subcontractors.</p><br> <p>Manages/attends to all required/related meetings and arranges all project Quality requirements with the project owner/consultant and project management team.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p><strong>Responsible for ensuring compliance with all food safety standards and authorized to take corrective actions when necessary</strong></p><br><br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Experience in Quality Control and Quality Assurance, preferably in an industrial manufacturing environment.</p><br> <p>Strong knowledge and experience in quality standards, regulations, and compliance requirements.</p><br> <p>Efficient leadership and management skills, with the ability to inspire and motivate a team of professionals to achieve project objectives.</p><br> <p>Strong problem-solving and analytical skills, with the ability to analyze complex data and develop effective solutions.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Quality Assurance L3<br>Material testing &amp; Standard awareness L3<br>Statistical Quality Control L3<br>Sub-contractor Quality Management L3<br>QA Audits L3<br>Build High-Performing Teams<br>Provide Direction<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Dairy Science or Engineering<br>Profesional degree in Industrial Engineering or Lead Auditor certification (ISO 9001 or equal) or ASQC certification (CQM/CQE).<br><br><br><br> </div>

<p><font dir="auto" ><font dir="auto" >Ensure the installation, configuration, and maintenance of the IT infrastructure (workstations, servers, peripherals). Guarantee the availability, security, and performance of IT systems and networks. Manage technical support interventions for users (diagnosis, troubleshooting, assistance). Participate in the administration of databases and business applications. Follow and implement data backup and recovery procedures.</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" ><font dir="auto" >Proficiency in operating systems (Windows, Linux, etc.). Strong knowledge of computer networks (TCP/IP, LAN, WAN, VPN). Skills in database management (MySQL, Oracle, SQL Server). Knowledge of virtualization tools (VMware, Hyper-V). Proficiency in office software and industry-specific applications. If you match this profile, please send your CV by clicking on the "Apply" tab. Algiers, Bab El Oued</font></font></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The QA/QC Engineer ensures that work / projects are delivered based on good work practices and project specifications to guarantee completion of work within the given time limits with quality of work that meets or even exceeds the clients expectations by implementing international quality standards plans and quality procedures in all the construction activities. Assists in developing the Project Quality Management System by establishing procedures, plans and work instruction as needed.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Assist Project QA/QC Manager or Sr. QA/QC Engineer on implementing quality management system at site as per approved Project Quality Plan and IMS Procedures.</p><br> <p>Prepare work inspection requests (WIR) for each construction activity and submit to consultant to ensure it covers all the construction activities done on site.</p><br> <p>Check all incoming materials as per project specifications and approved material submittals.</p><br> <p>Monitor WIRs and test reports and update the Quality Manager and site team on the status.</p><br> <p>Establish and monitor control of QA/QC Plans, Method of Statements and Test Plans before commencement of the project and implementing it during the project in order to meet the project quality requirements and client’s expectations.</p><br> <p>Ensure that control of document procedures is implemented and all approved documents from consultant are distributed through the document control system.</p><br> <p>Check Inspection and Test Plan if available and all method statements and test plan are submitted for the consultant as per the approved ITP plan.</p><br> <p>Prepare work inspection request (WIR) for each construction activity and submitted to consultant to ensure it covers all the construction activities done on site.</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Verify if work inspections are carried out as per the plan and advice the construction team for the corrective action to avoid the rejection of work and emphasizes that work inspection shall passed during the first submission with 90% rate.</p><br> <p>Ensure all incoming materials are checked as per the project specifications and approved material submittals.</p><br> <p>Inspect all materials internally before offering inspection to the consultant, raising the NCR to the supplier in case the substandard material is delivered, the record of inspection shall be included in the month Quality report.</p><br> <p>Monitor WIR and test reports and update Management, Construction Team, Planning, Quantity Surveyors and Cost Control Departments about the current job status.</p><br> <p>Maintain the records of all work and material inspection and provide the data in the weekly progress meetings.</p><br> <p>Record all test results and ensure it's availability for steel along with the mill certificates.</p><br> <p>Make sure that logs are available along with the test reports for all types of test as per the approved testing matrix.</p><br> <p>Checks concrete pour cards are maintained on daily basis and copy is provided to the storekeeper to raise the SRV and to the cost controller/QS</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p> Knowledge of work related standards, specifications, and quality systems such as: ISO 9001, QCS, SMACNA,</p><br> <p>ASHRAE, NFPA, etc.).With enough technical experience on dealing with various QC issues. Knowledge of local</p><br> <p>employment laws/regulations sufficient to analyze proposed policies. In-depth knowledge on the Quality</p><br> <p>Management System (QMS) or Integrated Management System (IMS)</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 5 year(s) working experience, 3 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>QA Reviews and Inspections L2<br>QA Audits L2<br>Quality Control and Conformance L2<br>Quality Assurance L2<br>Agility<br>Standard Operating Procedures L2<br><br><br><u><b>Education</b></u> <br>Profesional degree in MMUP Engineer Registration (UPDA) or Lead Auditor certification (ISO 9001 or equal) or ASQC certification (CQM/CQE).<br>Bachelor's Degree in any related field or Civil Engineering<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview<br></p><p><span><strong>HYDRATIGHT by ENERPAC TOOL GROUP – Who we are</strong></span></p><br><p><span>Enerpac Tool Group Corp. is a leading provider of industrial tools, services, technology, and solutions, supporting a broad and diverse customer base across more than 100 countries. The organisation enables complex, often hazardous work to be carried out safely and efficiently. Enerpac Tool Group businesses are recognised for their expertise in high-pressure hydraulic tools, controlled force products, and precision positioning solutions.</span></p><br><p><span>Hydratight, part of Enerpac Tool Group, is a global provider of specialised mechanical and joint integrity services. For over 30 years, Hydratight has supported customers across oil and gas, power generation, petrochemical, and heavy industry to operate safely, efficiently, and reliably.</span></p><br><p><span>Hydratight combines technical expertise, certified workforce capability, and proven processes to deliver right-first-time, safety-critical solutions across the full asset lifecycle - from construction through to maintenance and decommissioning.</span></p><br><p><span><strong>Summary – Basic Function of the Role</strong></span></p><br><p><span>We are looking for a skilled and hands-on Mechanical Technician to join our workshop team. The role is responsible for repairing, inspecting, troubleshooting, testing, and maintaining hydraulic equipment and related tools. The Mechanical Technician will carry out equipment disassembly and reassembly, replacement of components, operational testing, calibration and accuracy testing, while ensuring all work is completed safely, accurately, and in accordance with established procedures and quality standards.&nbsp;</span></p><br><p><span><strong>Job Duties and Responsibilities</strong></span></p><br><ul><li>Repair hydraulic equipment, including disassembly, inspection, troubleshooting, replacement of parts, reassembly, and operational testing.</li><li>Prepare equipment and complete equipment request orders, including job preparation.</li><li>Diagnose and troubleshoot equipment repairs and accurately document all work completed.</li><li>Perform and document calibration and certification of accuracy testing on products and equipment.</li><li>Use gauging and measuring devices and perform required quality inspections.</li><li>Follow relevant work procedures and instructions using the appropriate company systems.</li><li>Build and maintain standard tools as required.</li><li>Pick and pack equipment, tools, and materials as required.</li><li>Support continuous improvement initiatives within the workshop.</li><li>Operate forklift trucks and VNA equipment safely, where trained and certified.</li><li>Perform additional workshop duties as required.</li></ul><p><span><strong>Skills and Competencies</strong></span></p><br><ul><li>Strong mechanical and hydraulic troubleshooting skills.</li><li>Ability to read and follow technical work procedures and instructions.</li><li>Good understanding of mechanical equipment, components, and workshop practices.</li><li>Ability to use measuring and gauging equipment accurately.</li><li>Strong attention to detail and commitment to quality.</li><li>Good documentation and record-keeping skills.</li><li>Ability to work independently as well as effectively within a team.</li><li>Strong safety awareness and commitment to safe working practices.</li><li>Practical, hands-on approach to problem solving.</li><li>Ability to support continuous improvement and identify opportunities to improve workshop processes.</li></ul><p><span><strong>Education and Experience</strong></span></p><br><ul><li>Technical qualification or vocational training in Mechanical Engineering, Mechanical Maintenance, Hydraulics, or a related discipline.</li><li>Previous experience in a mechanical or hydraulic workshop environment is preferred.</li><li>Experience with hydraulic equipment repair, maintenance, troubleshooting, and testing is highly desirable.</li><li>Experience with calibration, accuracy testing, gauging, or quality inspection is an advantage.</li><li>Forklift and VNA certification is preferred, or willingness to obtain the required certification.</li><li>Experience using electronic systems to access work procedures and document completed work is an advantage.</li></ul><p><span><strong>Diversity Statement</strong></span></p><br><p><span><em>We are committed to recruiting, hiring, training, and promoting qualified people of all backgrounds, and make all employment decisions without regard to any protected status. We will ensure your application is fairly considered and if hired, you will have an equitable opportunity to give your best at work, not because we’re required to, but because it’s the right thing to do. Enerpac Tool Group will provide reasonable accommodations within the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, reach out to our Talent Acquisition Team for additional information.</em></span></p><br><p><span>&nbsp;<em>If you’re looking for a unique, exciting career with variety and potential for growth, Enerpac Tool Group offers challenges &amp; extraordinary rewards for people on a global scale.</em></span></p><br><p><span><em>The above statements reflect the general details necessary to describe the principle functions of the job described and shall not be construed as a detailed description of all the work requirements that may be inherent in the job.</em></span></p><br><p><span><em>#LI-LD1</em></span></p><br> </div>

<p>Production: Carry out CFA (Low Voltage) studies during the design and site execution follow-up phases. Produce minutes for designers, written documents, and calculation notes. Be the guarantor of the technical quality of his studies, of the plans and diagrams produced by the designer(s) associated with him. Trigger actions to prevent and address non-conformities. Ensure that the execution of studies by subcontractors complies with program requirements and technical specifications. Ensure, in his role, the synthesis of studies with other specialists collaborating on the same project. Ensure technical watch regarding standards and codes related to his specialty. Participate in responses to calls for tenders and competitions. Within the scope of assigned missions, guarantee compliance with deadlines and report to the head of the department and the agency director on the evolution and progress of studies.</p><p>External Representation: Lead and/or participate in various meetings with partners and clients during the different phases of the project. Manage and maintain close client relationships. Participate in contract end reviews and feedback. In the context of external relations, play a role in promoting the image of the company and the Group's subsidiaries. Participate, upon solicitation, in commercial activities as a technical referent.</p><p>Work Location: Staoueli, Algiers.</p><p>Do not hesitate to apply or share this opportunity!</p><p><strong>Desired Candidate Profile</strong></p><p>Hold a Licence or a Master's degree in electrical or mechanical engineering</p><p>Have between 2 to 6 years of experience</p><p>Master English and French languages</p><p>Master Office Pack, Autocad, Caneco REVIT software.</p>

<p><b>POSITION SUMMARY</b></p><p><br></p><p>&nbsp;Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><h4><b>PREFERRED QUALIFICATIONS</b></h4> <p>Education: High school diploma or G.E.D. equivalent and vocational or technical background.</p> <p>Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: Valid Driver s License</p> <h4><b>REQUIRED QUALIFICATIONS</b></h4> <p>Universal Chlorofluorocarbon (CFC) Certification</p> <p>Must meet applicable state and federal certification and/or licensing requirements.</p>