Production Technician Jobs

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Perform topographic layouts (buildings, roads, and various networks) according to the execution plans. Carry out topographic surveys (existing conditions, as-built drawings, earthwork volumes). Monitor and control levels (excavation bottoms, platforms, slabs, backfill). Verify the conformity of the layouts with the architect's and engineering firm's plans, and report any discrepancies. Prepare topographic reports and maintain field logs. Assist the Project Manager and the Site Supervisor in monitoring progress and quantity take-offs (backfill, reinforced concrete, etc.). Use and maintain surveying equipment and ensure its proper calibration. Coordinate with the engineering office and the earthworks and structural work teams to ensure the successful execution of the works.</font></font></p><p><strong>Desired Candidate Profile</strong></p><ul><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Diploma in Topography / Surveyor-Topographer (Institute or University), at the level of Senior Technician or Engineer.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Minimum 5 years of experience in a similar position.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Proven experience in a large construction site environment, ideally in public works, building or roadworks.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">TECHNICAL SKILLS: Proficiency in using surveying instruments and equipment. Proficiency in surveying and drafting software (AutoCAD, Covadis, or equivalent). Ability to read and interpret construction plans, formwork plans, and site plans. Knowledge of volume calculation methods, leveling, and quantity surveying. Ability to perform the necessary topographic checks and verifications to ensure the proper execution of the work.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">BEHAVIORAL SKILLS: Rigor and precision in data collection, verification, and reporting. Autonomy and organizational skills on site. Good teamwork skills and ability to work under pressure and meet deadlines. Responsiveness and ability to quickly identify and report any anomalies.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Availability for site visits (Sidi Hellou, Boudouaou).</font></font></li></ul>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Collaborate with the plant manager to improve HSE procedures in accordance with legal and other management requirements. Ensure the planning, implementation, and monitoring of HSE actions. Guarantee the implementation of an efficient HSE management approach. Monitor compliance with HSE rules and requirements by all employees, visitors, customers, and subcontractors. Plan actions resulting from HSE assessments and improvement needs. Measure the effectiveness and/or efficiency of implemented HSE actions. Conduct HSE inspections at the plant level and prepare reports accordingly. Actively contribute to defining the HSE policy (safety, environment, sustainable development). Establish and ensure the implementation of procedures related to hazard identification and risk/impact assessment at the plant level. Establish, improve, and maintain documented HSE information defining organizational procedures (methods, operating procedures, rules, etc.). Ensure the availability, use, and monitoring of risk management equipment (PPE, EPC, etc.). Conduct investigations and analyses of workplace accidents and incidents. Maintain regulatory and standards-related documentation and verify compliance. Draft information notes and prevention sheets related to HSE and ensure their communication and posting. Lead the teams of stakeholders in the HSE system (process owners, department heads, staff, etc.) to develop their skills and HSE culture. Participate in the evaluation of the overall performance of processes and the HSE system. Ensure coordination with the relevant local authorities. Propose improvements (processes and products) in HSE matters. Provide HSE induction for new recruits. Participate as a consultant in projects involving the implementation of new facilities or equipment. Provide training and awareness on HSE rules and procedures.</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">HSE Technician with 2-3 years of experience in the role. If you match this profile, please send your CV by clicking on the "Apply" tab. Algiers</font></font></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Yassir is the leading super application in the field of on-demand services, operating predominantly in the Maghreb region. Yassir's mission is to revolutionize the way daily services are accessed. Currently established in over 45 cities across several countries such as Algeria, Morocco, Tunisia, and Senegal, our presence also extends to other countries like France and sub-Saharan Africa. Strongly supported by world-renowned investors such as BOND and Y Combinator, pioneers of companies like Airbnb, Stripe, Dropbox, and Doordash, Yassir has successfully raised significant funding rounds totaling nearly $200 million. Beyond simple service provision, our vision is to create a dynamic marketplace aimed at satisfying our users' needs while instilling fundamental social values.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>The driver acquisition agent must ensure the smooth running of the integration and the follow-up of the relationship with partner drivers and delivery personnel, ensuring compliance with internal process requirements.</p><p>Tasks to accomplish:</p><ul><li>Establish and manage a new selection and recruitment process for Drivers.</li><li>Prospect, recruit, and train drivers to best develop our driver network.</li><li>Undertake necessary actions to improve recruitment and optimize our offering through optimal distribution of drivers in our regions.</li><li>Report any relevant field information to their hierarchy and take necessary actions as needed.</li></ul><p>Profile:</p><ul><li>Higher technician diploma/Bac+2 and above in communication, management, commerce, or other.</li><li>Previous experience in a customer-facing role is desirable.</li><li>Demonstrate a great sense of listening.</li><li>Be a good communicator and possess excellent human qualities.</li><li>Autonomous spirit.</li><li>Problem-solving, solution-oriented.</li><li>Sense of listening.</li><li>Stress resistant.</li><li>Rigor and integrity.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description<br><p><u><strong>Role:</strong></u></p><br><p>The Instrument Technician will be reporting directly to the I&amp;C supervisor. He will be responsible to carry out maintenance / repair activities for all instruments in the Desalination / RO plant along with new installations / modifications whenever required.</p><br><p><u><strong>Functional / Operational tasks:</strong></u></p><br><ul><li><p>To carry out all routine maintenance &amp; repair activities of all the instruments at desalination plant&nbsp;</p><br></li><li><p>Troubleshoot all online process monitors and analyzer instruments&nbsp;</p><br></li><li><p>Analysis of faults and reporting to the Instrument Supervisor&nbsp;</p><br></li><li><p>Perform all scheduled &amp; unscheduled maintenance activities with optimum utilization of resources&nbsp;&nbsp;</p><br></li><li><p>Calibration of all field instruments, like PH, Conductivity, Turbidity, Temperature&amp; Pressure Transmitters, Pressure gauges, Control valves etc.,</p><br></li><li><p>Capable to execute the new installations &amp; modification works whenever required&nbsp;</p><br></li><li><p>Document &amp; Recordkeeping of all maintenance activities performed and instrument calibration reports&nbsp;</p><br></li><li><p>To maintain good housekeeping &amp; adhere to EHS requirements in carrying out all the instrument activities.&nbsp;</p><br></li><li><p>Maintain the tools by regular inspections&nbsp;</p><br></li><li><p>New project study and realization,&nbsp;</p><br></li><li><p>Supervise SD teams and report (I&amp;C task and coordinate with the other department)</p><br></li><li><p>Technical&nbsp;report and improvement proposal</p><br></li></ul><br>Qualifications<br><p><u><strong>Education: Education &amp; Trainings required: </strong></u></p><br><ul><li>Diploma in Instrumentation &amp; Control discipline (TS, DEUA, or equivalent..)&nbsp;</li><li><p>Minimum 3 years work experience is required with Diploma; At least 2 years maintenance work experience, preferably in water &amp; waste water treatment plant/Desalination plant/RO plant/power/petroleum/chemical or any other continuous manufacturing process industry.</p><br></li><li><p>Good knowledge on the concept of Automation&nbsp;</p><br></li><li><p>Ability to repair/calibrate all online process instruments&nbsp;</p><br></li><li><p>Capable to understand P&amp;ID, Instrument loop diagrams and control panel wiring diagram&nbsp;</p><br></li><li><p>Proficient in HART Protocol and Emerson 376/476 Field Communicators.</p><br></li><li><p>Comprehensive knowledge of automated process control systems, including GE Fanuc PLCs and SCADA.</p><br></li></ul><p><u><strong>Work experience:&nbsp;</strong></u></p><br><ul><li><p>Breadth/depth of experience required&nbsp;</p><br></li><li><p>Experience working with similar systems in a similar business environment</p><br></li></ul><p><u><strong>IT knowledge :</strong></u></p><br><ul><li><p>MS Office and Google Apps</p><br></li></ul><p><u><strong>Languages level:</strong></u></p><br><ul><li><p>English: Required for reading error codes, hardware guides, and writing reports</p><br></li></ul><br>Additional Information<br><p><strong>As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.</strong></p><br><br><br> </div>

<p>SUMMARY OF THE ROLE Join our Dynamic as an Instrumentation technician you will be responsible for executing maintenance works of all assets related to the Operations as delegated by your line Manager in line with Group Maintenance Guidelines, Procedures, and HSEQ Management System. This position is based in Freha Factory, and reports to the Maintenance Planner.</p><p><b><br></b></p><p><b>Responsibilities:</b></p><ul><li>Execute preventive, corrective, and predictive maintenance activities in accordance with established maintenance standards, procedures, and safety requirements to ensure optimal equipment performance and reliability.</li><li>Diagnose equipment faults and perform timely repairs or replacement of defective components, parts, and systems to minimize downtime and maintain operational efficiency.</li><li>Support the continuous operation, reliability, and quality performance of production equipment, utilities, and facility assets.</li><li>Adhere to and promote 5S workplace organization standards to maintain a safe, clean, and efficient working environment.</li><li>Evaluate maintenance inspection findings, identify corrective actions, and develop effective plans to close identified gaps and prevent recurrence.</li><li>Contribute to continuous improvement initiatives aimed at enhancing equipment reliability, maintenance effectiveness, and operational performance.</li></ul><p>WHAT WE ARE LOOKING FOR AND WHAT WE OFFER</p><p>We are looking for:</p><ul><li>Instrumentation University degree.</li><li>Between 02 to 04 years of relevant experience.</li><li>Proficient in communicating in English Language (Both written and verbal).</li></ul><p>we offer:</p><ul><li>Competitive compensation and benefits</li><li>Continuous learning opportunities and training activities through on-the-job training and our in-house learning Jotun Academy.</li><li>Career development opportunities across multiple disciplines and geographies</li><li>Leaders who focus on engaging and enabling their team, proven by consistently high employee feedback scores</li><li>A supportive and inclusive company culture where you can be your authentic self</li><li>A focus on having fun together through team buildings and social activities.</li></ul><p>Competencies for this Position:</p><ul><li>Effective communication: communicates in a clear, precise and structured way; speaks with authority and conviction; presents effectively.</li><li>Execution: adheres to company rules and procedures; executes plans with commitment and determination; achieves high quality results.</li><li>Professional expertise : demonstrates specialist knowledge and expertise in own area; participates in continuous professional development.</li><li>Constructive teamwork co-operates well with others; shares knowledge, experience and information; supports others in the pursuit of team goals</li></ul><p>POSITION INFORMATION</p><p>Company: Jotun Technover P SPA</p><p>Contract Type: Regular</p><p>Time Type: Full time</p><p>CLOSING DATE (dd.mm.yyyy): 17.08.2026</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Instrumentation University degree.</li><li>Between 02 to 04 years of relevant experience.</li><li>Proficient in communicating in English Language (Both written and verbal).</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>The R&amp;M Technician - Wireline role undertakes hands-on tasks and utilises Weatherford's facilities, equipment, machinery, and systems. The role applies techniques and practices to complete the scope of tasks covering inspection, repair, and maintenance of wireline field tools, preparing them for their next assignment. Tasks will span the entire process from receiving the tools, dismantling, repairing, and refurbishing using technical manuals, procedures, and technical work instructions.</span></span></p><br><p><span><span>Responsibilities:</span></span></p><br><ul><li><span>Participates in all daily operations &amp; safety meetings, toolbox, Job Hazard Analysis (JHA) and reports any issues promptly using the appropriate tools</span></li><li><span>Maintains equipment, facilities, and work area in a presentable and safe working condition</span></li><li><span>Repairs machines, equipment, or structures, using tools such as hammers, hoists, cranes, drills, wrenches, or equipment such as precision measuring instruments or electrical or electronic testing devices</span></li><li><span>Inspects used parts to determine changes in dimensional requirements, using rules, callipers, micrometres, or other measuring instruments.</span></li><li><span>Follows maintenance processes &amp; procedures to undertake the following: unloading, disassembly, cleaning, pressure testing, visual checking, painting, assembly, loading, and storage of tools, completing all necessary documentation as required against their level of training &amp; competence</span></li><li><span>Initiates, updates, closes out AIRTs, PFTs, forms, checklists, and work orders during maintenance of equipment and assets, following the necessary maintenance processes and procedures against their level of training &amp; competence</span></li><li><span>Complies with the WO labour time log by accurately clocking in/Out of the WO (Work Order) Time tracking system</span></li><li><span>Utilises all tools and lifting equipment for opening and closing crates &amp; containers and uses pallet and forklift trucks for the safe movement of equipment to and from vehicles, storage areas, racks, shelves, and bins against their level of training &amp; competence. Must be certified for the use of lifting equipment, including forklift trucks and cranes</span></li><li><span>Accepts incoming shipments and prepares shipments for dispatch, validating quantities and ensuring all necessary documentation is accurate and complies with all Company procedures against their level of training &amp; competence &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</span></li><li><span>Order parts, supplies, or equipment from catalogues or approved suppliers according to Weatherford’s guidelines and procedures</span></li><li><span>Supports and complies with the LEAN initiatives and participates in the continuous efficiency improvement program of the facility.</span></li><li><p><span>Performs other duties and activities safely as assigned by supervisor within physical constraints of the job</span></p><br></li></ul><p><span>Required:</span></p><br><ul><li><p><span>3-5 years experience of R&amp;M within wireline is essential</span></p><br></li><li><p><span>Fluent English both written and verbal</span></p><br></li><li><p><span>Strong communication skills</span></p><br></li><li><p><span>Ability to work under pressure</span></p><br></li><li><p><span>Willing to work in remote locations</span></p><br></li><li><p><span>Experience of Sondex Tools would be advantage</span></p><br></li><li><p>Experience of working in Algeria</p><br></li><li><p>Eligible to work in Algeria without a visa</p><br></li></ul><p><span>Qualifications:</span></p><br><ul><li><span><span>High School Diploma</span></span></li></ul><br> </div>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Job Description: The Kitchen and Laundry Equipment Technician's main responsibility is to ensure the availability, proper functioning, and safety of the hotel's technical installations related to food production and cold storage. They work on kitchen equipment (cooking, preparation, washing/dishwashing), laundry facilities, and especially cold storage rooms (positive/negative temperature, evaporators, temperature control, defrosting, alarms). They perform checks and preventative maintenance, carry out corrective maintenance and troubleshooting, adhering to maintenance plans, internal procedures, and hygiene requirements (cold chain, food safety). In case of an anomaly (breakdown, temperature drift, alarm, regulation failure), he/she applies the procedures for securing, rapid reaction, lockout if necessary, and he/she alerts the manager, while ensuring the traceability of interventions and the conformity of equipment.</font></font></p><ul><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Main Missions: Carry out checks to ensure proper functioning of kitchen equipment and associated areas (according to scope: professional washing/dishwashing, production equipment, ventilation/extraction if applicable).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Ensure daily/scheduled monitoring of cold rooms and refrigerated cabinets: temperature control, alarms, defrosting (if applicable), general condition of units.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Check and adjust refrigeration systems according to procedures: regulation, thermostats/probes, controls, valves (depending on site), air circulation, condition of evaporators and condensers.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Diagnose faults (symptoms, alarms, regulation faults, loss of cold) and propose/implement actions in accordance with the level of authorization.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Carry out preventive maintenance: technical cleaning (depending on areas), checks, inspections, safety checks, intervention planning.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Perform corrective maintenance: replacement of wear parts (according to authorization), recommissioning, validation tests.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Participate in interventions with service providers (refrigeration, electricity, gas, automation) and transmit a clear technical report.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Ensure strict adherence to the cold chain: securing in case of deviation, immediate alert, organization of continuity if applicable according to internal procedures.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Apply food hygiene rules and internal procedures (zones, cleaning, constraints of production plans).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Respect electrical/mechanical safety rules and workstation safety (lockout/tagout if necessary, PPE, signage).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Ensure traceability: drafting of intervention orders, reports, readings (temperatures/controls), tracking of parts/consumables.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Keep preventive actions and reporting up to date.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Participate in internal audits / quality control and preparation of verifications.&nbsp;</font></font></li></ul><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Desired Profile: Technician diploma/BTS (French vocational diploma) in industrial maintenance, electrotechnics, refrigeration and air conditioning, or equivalent. 2-5 years of experience in the maintenance of catering/institutional equipment and/or commercial refrigeration (ideally in a hotel environment). Solid knowledge of maintenance and diagnostics (electrical, basic mechanics, control systems). Knowledge or mastery of commercial refrigeration: temperature control, probes, evaporators/condensers, defrosting, alarms, and performance concepts. Ability to work on kitchen/institutional equipment (production, professional dishwashing/washing if applicable). Proficiency in using testing instruments (multimeter according to certifications, thermometers/probes, alarm and control system reading). Ability to read technical manuals, diagrams, and simple plans.</font></font></p>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Job Description: The Aquatic Equipment Maintenance Technician's main responsibility is to ensure the proper functioning and sanitary safety of the pools (seawater and thermal water). They ensure that the water constantly meets the required physicochemical and microbiological criteria by applying filtration, disinfection, and treatment protocols. They perform daily checks (pH, temperature, disinfectant, turbidity), verify and adjust equipment (pumps, filters, dosing systems, valves, controls), carry out first-level maintenance operations (cleaning, backwashing/regeneration, monitoring of consumables), and ensure that the pools are ready for opening for treatments. In case of an anomaly (parameter deviation, alarms, breakdowns), he/She applies the procedures for securing, locking out and alerting the person in charge, while strictly respecting the rules of hygiene, chemical safety and the traceability of controls.</font></font></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Main Missions:</font></font></p><ul><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Carry out daily water quality checks (pH, disinfectant, temperature, turbidity according to the procedures imposed by the manager and according to the standards).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Check the operation of the filtration/treatment equipment (pumps, filters, flow rate, valves, dosers, regulation).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Adjust treatment parameters according to internal guidelines (pH correction, disinfectant dosage, balancing)</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Ensure disinfection and treatment effectiveness according to the establishment's protocol.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Carry out the filtration operations (backwashing/regeneration) according to the maintenance plan.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Control and maintain the circulation and good homogeneity of the water in the basins.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Carry out the cleaning of the pools (bottoms, walls, gutters/skimmers, vacuuming/collecting according to equipment).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Maintain the areas and associated equipment (cleaning equipment, grates, drains, technical rooms according to internal rules).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Monitor the availability of treatment pools (water compliant before opening).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Detect anomalies (non-compliance of water parameters, alarms, breakdowns) and apply the procedure: alert, safety measures, lockout/tagout.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Replace consumables / perform first-level maintenance (if within the defined scope).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Clean and inspect accessible parts of treatment and filtration systems.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Participate in troubleshooting in case of failure and transmit the information to the maintenance/technical department.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Ensuring chemical safety: storage, handling of products, compliance with PPE and instructions.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Respect hygiene rules and risk prevention measures (heat, humidity, chemicals, electrical risks).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Maintain records and traceability (monitoring notebooks, logs, quality/control documents).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Participate in internal audits/controls and the preparation of regulatory checks.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Respect internal procedures and control deadlines (planned frequencies).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Alert the supervisor in case of repeated deviations or situations not covered by the instructions. Aquatic&nbsp;</font></font></li></ul><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Desired Profile: Technician/BTS (French vocational diploma) in Water Management, Industrial Maintenance, or equivalent. 2-5 years of experience in swimming pools, ideally in a hotel (luxury/thalassotherapy), hospital, or thermal spa environment. Expertise in water treatment processes (physicochemical, filtration, disinfection). Proficiency in measurement tools, water quality control (pH, TH, chlorine), and health risks (Legionella). Knowledge of the specific constraints related to seawater (corrosion, salinity, etc.). Ability to read technical drawings and hydraulic diagrams and manage emergencies promptly. Complete mastery of chemical and biological safety regulations.</font></font></p>

<p>Conception and realization of VRD studies for various projects. Production of VRD network execution plans (AEP, sanitation, fire). Development of calculation notes and DQE. Ensure approvals of studies with various organizations. Ensure site work monitoring and propose technical solutions. Verify BET plans and ensure their technical compliance. Ensure internal and external communication and coordination.</p><p><strong>Desired Candidate Profile</strong></p><p>BAC+5 in Civil Engineering, Hydraulics or equivalent. Minimum 2-3 years of experience in VRD studies or building projects. Good command of AutoCAD, Covadis and EPANET software. Knowledge of VRD standards and regulations. Good command of French, English is a plus. Sense of responsibility and good team spirit.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Ingénieur-e méthodes composites F/H</p><br><br><p>CDI</p><br><br><p>Ingénieur &amp; Cadre</p><br><br><p>Temps complet</p><br><br><p>Rattaché(e) à la direction industrielle dans le département méthodes Florange, vous travaillerez en tant qu'ingénieur(e) méthodes en support à la production de pièces Composites.<br>Votre fonction est de supporter la production pour l'atteinte des objectifs de performances des lignes de production de l'UAP et de piloter des projets d'amélioration de la performance. Vous devrez rapidement maitriser les moyens et procédés du secteur pour assurer ces missions et devenir force de proposition.<br>Dans ce cadre, vous êtes en lien permanent avec la production et les services supports (Qualité / Planification / Matériaux &amp; Procédés / Métrologie, Maintenance) de l'UAP.<br>Vos missions principales constitueront notamment à :<br>- Assurer le support technique à la production et tenir à jour la documentation nécessaire à la fabrication des pièces.<br>- Piloter les sujets QRQC pour corriger les problèmes et atteindre le niveau de performance Sécurité, Qualité, Coût et Délai objectif.<br>- Piloter des projets d'amélioration visant à atteindre le niveau de performance Sécurité, Qualité, Coût et Délai objectif.<br>- Rédiger les expressions de besoin outillages.<br>- Décliner la politique SSE et Ergonomie lors des créations ou modifications de poste de travail.<br>- Être l'interface technique en relation avec le client.</p><br><br><p>Dans le cadre de votre mission, des déplacements ponctuels et du travail ponctuel en 2x8 peuvent être à prévoir.</p><br><br><p>De formation Bac+5 dans le domaine industriel, vous souhaitez rejoindre une équipe jeune et dynamique.<br>Une première expérience dans l'industrialisation de procédés est souhaitée pour le poste. Des connaissances dans les matériaux composites, les techniques de contrôle non-destructif et le lean manufacturing constitueront un atout.<br>Vous êtes reconnu(e) pour votre sens de la communication et du support, vous êtes orienté(e) performance et reconnu(e) pour votre dynamisme et votre proactivité. Vous êtes autonome dans le pilotage de vos actions et à l'aise avec le travail en équipe.</p><br><br><br> </div>

<p><font dir="auto" ><font dir="auto" >Draft pharmaceutical dossiers in collaboration with the Pharmaceutical Administration Department (DAR). Draft and prepare technical release dossiers. Ensure coordination with the National Laboratory for the Control of Pharmaceutical Products (LNCPP) for batch release. Draft and implement procedures related to your activity. Ensure compliance with Good Practices and that all company activities comply with current pharmaceutical regulations. Report on your activities to the Technical Director Pharmacist and propose improvements as needed. Participate in the implementation of the quality policy, the development and management of the quality system. Provide scientific and regulatory expertise to the relevant departments: development, quality, production, marketing, and sales. Participate in the implementation of necessary changes (change management procedure). Conduct investigations at the production and laboratory levels following reported anomalies and non-compliant results. Participate in the handling of complaints and pharmacovigilance cases. Verify and monitor batch records. Participate in regulatory and informational monitoring. Draft and update specifications (PA, PF and excipients).</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" ><font dir="auto" >Doctor of Pharmacy</font></font></p><p><font dir="auto" ><font dir="auto" >Experience in a similar position</font></font></p>

<p><font dir="auto" ><font dir="auto" >Diagnose and resolve complex incidents (levels 2 &amp; 3) </font></font><br><font dir="auto" ><font dir="auto" >Provide technical support to field technicians and supervisors </font></font><br><font dir="auto" ><font dir="auto" >Analyze recurring breakdowns and propose sustainable solutions </font></font><br><font dir="auto" ><font dir="auto" >Analyze technical needs and propose appropriate solutions </font></font><br><font dir="auto" ><font dir="auto" >Manage critical situations </font></font><br><font dir="auto" ><font dir="auto" >Coordinate multi-site interventions if necessary </font></font><br><font dir="auto" ><font dir="auto" >Ensure technical communication with the client </font></font><br><font dir="auto" ><font dir="auto" >Produce detailed analysis reports </font></font><br><font dir="auto" ><font dir="auto" >Implement corrective and preventive actions </font></font><br><font dir="auto" ><font dir="auto" >Participate in the improvement of after-sales service procedures </font></font><br><font dir="auto" ><font dir="auto" >Prepare detailed technical reports Carry out </font></font><br><font dir="auto" ><font dir="auto" >and manage on-site technical missions </font></font><br><font dir="auto" ><font dir="auto" >Intervene in the workshop for equipment repair, configuration and preparation </font></font><br><font dir="auto" ><font dir="auto" >Provide training to the end customer </font></font><br><font dir="auto" ><font dir="auto" >Ensure the drafting of technical guides </font></font><br><font dir="auto" ><font dir="auto" >Train and supervise technicians</font></font></p><p><strong>Desired Candidate Profile</strong></p><h3>Dipl me :</h3><font dir="auto" ><font dir="auto" >Engineer or Master's degree (Bac+5) in technology, electronics, networks and telecommunications, computer science, electrical engineering, electronics or a similar field</font></font><br><h3><font dir="auto" ><font dir="auto" >Additional training:</font></font></h3><font dir="auto" ><font dir="auto" >Preventive Maintenance Training, </font></font><br><font dir="auto" ><font dir="auto" >IT Security Training, </font></font><br><font dir="auto" ><font dir="auto" >Systems and Network Management Training, </font></font><br><font dir="auto" ><font dir="auto" >Coding and Programming Training, </font></font><br><font dir="auto" ><font dir="auto" >Electronic Circuit Repair Training</font></font><br><h3><font dir="auto" ><font dir="auto" >Mastery of technical tools related to the field of activity:</font></font></h3><font dir="auto" ><font dir="auto" >Analytical and problem-solving skills; </font></font><br><font dir="auto" ><font dir="auto" >Project management </font></font><br><font dir="auto" ><font dir="auto" >; Professional technical writing; </font></font><br><font dir="auto" ><font dir="auto" >Proficiency in evolving IT tools</font></font><br><h3><font dir="auto" ><font dir="auto" >Knowing how to be:</font></font></h3><font dir="auto" ><font dir="auto" >Sense of responsibility, </font></font><br><font dir="auto" ><font dir="auto" >analytical and synthesis skills </font></font><br><font dir="auto" ><font dir="auto" >, rigor and organization, </font></font><br><font dir="auto" ><font dir="auto" >leadership and teamwork, </font></font><br><font dir="auto" ><font dir="auto" >good communication</font></font><br><h3>Exp rience :</h3><font dir="auto" ><font dir="auto" >Minimum 2-3 years in preventive and corrective maintenance, Project Manager or similar role, with team supervision experience preferred. </font></font><br><font dir="auto" ><font dir="auto" >Job description validation. HSE standards.</font></font>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Assist the Technical Director in his activities. Participate in monitoring production and quality. Ensure compliance with GMP and internal procedures. Participate in the drafting of technical documents. Collaborate with different departments.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Doctor in Pharmacy. Previous experience in the pharmaceutical industry is an asset. Good knowledge of GMP. Rigor, organization and team spirit.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Description de l'entreprise<br><br><p>Rejoignez un hôtel membre du réseau Accor, dont le groupe réunit plus de 5 500 hôtels, 10 000 restaurants et destinations lifestyle, dans 110 pays.</p><br><p>Ici, nous croyons en vous et en ce que vous apportez.</p><br><p>Les opportunités de développement et d'évolution sont nombreuses. Chaque projet, chaque action contribue à créer un impact positif et mémorable pour nos clients, nos collègues et aussi pour notre planète.</p><br><p>Ensemble, nous incarnons la vision de l’hospitalité responsable. Devenez un Heartist®, et laissez votre cœur vous guider dans ce monde où la vie bat plus fort.</p><br><br>Description du poste<br><br><p>Le/La technicien (e) des équipements de cuisines et buanderie a pour mission principale d’assurer la disponibilité, le bon fonctionnement et la sécurité des installations techniques de l’hôtel liées à la production alimentaire et au stockage frigorifique. Il/Elle intervient sur les équipements de cuisine (cuisson, préparation, lavage/vaisselle), la buanderie/linge, et surtout sur les chambres froides (froid positif/négatif, évaporateurs, régulation, dégivrages, alarmes).<br>Il/Elle réalise les contrôles et maintenances préventives, assure la maintenance corrective et le dépannage en respectant les plans de maintenance, les procédures internes, et les exigences d’hygiène (chaîne du froid, sécurité alimentaire).<br>En cas d’anomalie (panne, dérive de température, alarme, défaut de régulation), il/elle applique les procédures de mise en sécurité, de réaction rapide, de consignation si nécessaire, et il/elle alerte le responsable, tout en garantissant la traçabilité des interventions et la conformité des équipements.</p><br><p><strong>Missions Principales :</strong></p><br><ul><li>Réaliser les contrôles de bon fonctionnement des équipements cuisine et zones associées (selon périmètre : lavage/vaisselle pro, équipements de production, ventilation/extraction si applicable).</li><li>Assurer le suivi quotidien/programmés des chambres froides et armoire frigorifiques : contrôle des températures, alarmes, dégivrages (si concerné), état général des unités.</li><li>Vérifier et régler les systèmes frigorifiques selon procédures : régulation, thermostats/sondes, commandes, vannes (selon site), circulation d’air, état des évaporateurs et condensateurs.</li><li>Diagnostiquer les pannes (symptômes, alarmes, défauts de régulation, perte de froid) et proposer/mettre en œuvre des actions conformément au niveau d’habilitation.</li><li>Réaliser la maintenance préventive : nettoyage technique (selon zones), contrôles, inspections, vérifications de sécurités, planification des interventions.</li><li>Exécuter la maintenance corrective : remplacement de pièces d’usure (selon autorisation), remise en service, tests de validation.</li><li>Participer aux interventions avec les prestataires (froid, électricité, gaz, automatismes) et transmettre un compte rendu technique clair.</li><li>Assurer le respect strict de la chaîne du froid : mise en sécurité en cas de dérive, alerte immédiate, organisation de la continuité si applicable selon procédures internes.</li><li>Appliquer les règles hygiène alimentaire et les procédures internes (zones, nettoyage, contraintes des plans de production).</li><li>Respecter les règles sécurité électrique / mécanique et sécurité au poste (consignation si nécessaire, EPI, signalisation).</li><li>Assurer la traçabilité : rédaction de bons d’intervention, comptes rendus, relevés (températures/contrôles), suivi pièces/consommables.</li><li>Tenir à jour les actions préventives et le reporting.</li><li>Participer aux audits internes / contrôles qualité et à la préparation des vérifications.</li></ul><br>Qualifications<br><br><p><strong>Profil Recherché :&nbsp;</strong></p><br><ul><li>Diplôme de Technicien / BTS en maintenance industrielle, électrotechnique, froid et climatisation, ou équivalent.</li><li>Expérience de 2 à 5 ans en maintenance d’équipements de restauration/collectivités et/ou froid commercial (idéalement en environnement hôtelier).</li><li>Connaissances solides en maintenance et diagnostic (électrique, mécanique de base, régulation).</li><li>Notions ou maîtrise du froid commercial : régulation température, sondes, évaporateurs/condenseurs, dégivrage, alarmes, notions de performance.</li><li>Capacité à intervenir sur équipements cuisine/collectivité (production, lavage/vaisselle pro si concerné).</li><li>Maîtrise des instruments de contrôle (multimètre selon habilitations, thermomètres/sondes, lecture alarmes et régulation).</li><li>Capacité à lire des notices techniques, schémas et plans simples.</li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul> <li><span ><font dir="auto" ><font dir="auto" >Prospecting for new clients.</font></font></span></li> <li><font dir="auto" ><font dir="auto" >To ensure the monitoring and retention of the client portfolio.</font></font></li> <li><font dir="auto" ><font dir="auto" >Negotiate and close sales.</font></font></li> <li><font dir="auto" ><font dir="auto" >Track orders and payments.</font></font></li> <li><font dir="auto" ><font dir="auto" >To produce sales reports.</font></font></li> </ul> <ul> <li><font dir="auto" ><font dir="auto" >Sales and negotiation techniques.</font></font></li> <li>Communication et relation client.</li> <li><font dir="auto" ><font dir="auto" >Organization and autonomy.</font></font></li></ul></div></section>

<p>Create visuals for communication materials. Design content for social networks and the web. Produce layouts and graphic retouching.</p><p><strong>Desired Candidate Profile</strong></p><p>1 year of experience in a similar position. Mastery of Adobe Photoshop, Illustrator and InDesign. Creativity, rigor and organizational skills.</p>

<p><font dir="auto" ><font dir="auto" >Manage data projects from the design phase to production deployment. Gather and analyze business requirements. Collect, process, and analyze data from various sources. Design and maintain dashboards and key performance indicators (KPIs). Produce analytical reports and formulate recommendations. Coordinate project stakeholders and monitor deadlines. Ensure data quality, reliability, and security.</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" ><font dir="auto" >Master's degree (or equivalent) in Computer Science, Data Science, Statistics, Business Intelligence, or a related field. At least two years of experience in a similar role. Proficiency in data analysis tools (advanced Excel, SQL, Power BI, Tableau, or equivalent). Knowledge of Python or R is a plus.</font></font></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul> <li><font dir="auto" ><font dir="auto" ><font dir="auto" ><font dir="auto" >On-ripper Machine</font></font></font></font></li><li><font dir="auto" ><font dir="auto" ><br></font></font></li><li><font dir="auto" ><font dir="auto" >Ensure the operation and monitoring of production machines.</font></font></li> <li><font dir="auto" ><font dir="auto" >Perform basic adjustments before and during production.</font></font></li> <li><font dir="auto" ><font dir="auto" >Control the quality of manufactured products.</font></font></li> <li><font dir="auto" ><font dir="auto" >Report any anomalies or malfunctions.</font></font></li> <li><font dir="auto" ><font dir="auto" >Ensure compliance with safety and quality guidelines.</font></font></li> <li><font dir="auto" ><font dir="auto" >Keep the workstation clean.</font></font></li> </ul> <ul> <li><font dir="auto" ><font dir="auto" >Experience in a similar position preferred.</font></font></li> <li><font dir="auto" ><font dir="auto" >Sense of organization, rigor and team spirit.</font></font></li></ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul> <li><font dir="auto" ><font dir="auto" ><font dir="auto" ><font dir="auto" >Product Development &amp; Validation Manager IVD</font></font></font></font></li><li><font dir="auto" ><font dir="auto" ><br></font></font></li><li><font dir="auto" ><font dir="auto" >evaluate the technical performance of new products offered by OEM partners and suppliers.</font></font></li> <li><font dir="auto" ><font dir="auto" >Participate in the qualification of products before their commercial launch.</font></font></li> <li><font dir="auto" ><font dir="auto" >Conduct analytical verification and validation studies.</font></font></li> <li><font dir="auto" ><font dir="auto" >Contribute to stability and reproducibility studies.</font></font></li> <li><font dir="auto" ><font dir="auto" >Write protocols, test reports and technical documents.</font></font></li> <li><font dir="auto" ><font dir="auto" >Participate in the technology transfer to production.</font></font></li> <li><font dir="auto" ><font dir="auto" >Ensure the traceability of activities in accordance with quality requirements.</font></font></li> <li><font dir="auto" ><font dir="auto" >Collaborating with the Quality, Regulatory, Production and Marketing teams.</font></font></li> <li><font dir="auto" ><font dir="auto" >Participate in scientific and technological monitoring in the field of in vitro diagnostics.</font></font></li> </ul> <p> <b> <u>Formation</u> </b> </p> <ul> <li><font dir="auto" ><font dir="auto" >Engineer in biotechnology, biochemistry or biology.</font></font></li> <li><font dir="auto" ><font dir="auto" >Master's degree in immunology, microbiology, biochemistry or equivalent disciplines.</font></font></li> </ul> <p> <b> <u>Exp rience</u> </b> </p> <ul> <li><font dir="auto" ><font dir="auto" >Desired experience of 2-5 years in a laboratory, pharmaceutical industry or medical device company.</font></font></li> <li><font dir="auto" ><font dir="auto" >Applications from young graduates with strong potential may be considered.</font></font></li> </ul> <p> <b> <u>Comp tences techniques</u> </b> </p> <ul> <li><font dir="auto" ><font dir="auto" >Knowledge of immunology and biochemistry.</font></font></li> <li><font dir="auto" ><font dir="auto" >Good mastery of ELISA techniques.</font></font></li> <li><font dir="auto" ><font dir="auto" >Knowledge of in vitro diagnostic devices.</font></font></li> <li><font dir="auto" ><font dir="auto" >Ability to analyze and interpret experimental results.</font></font></li> <li><font dir="auto" ><font dir="auto" >Proficiency in office software and data processing.</font></font></li> </ul> <p> <b> <u>Conditions</u> </b> </p> <ul> <li><font dir="auto" ><font dir="auto" >Languages: Fluent French.</font></font></li> <li><font dir="auto" ><font dir="auto" >Good command of technical English (reading scientific documentation and communicating with suppliers).</font></font></li> </ul> <p> <b> <u><font dir="auto" ><font dir="auto" >Personal qualities</font></font></u> </b> </p> <ul> <li><font dir="auto" ><font dir="auto" >Scientific rigor.</font></font></li> <li><font dir="auto" ><font dir="auto" >Analytical and synthesis skills.</font></font></li> <li><font dir="auto" ><font dir="auto" >Sense of organization.</font></font></li> <li><font dir="auto" ><font dir="auto" >Autonomy and ability to work in a team.</font></font></li> <li>Curiosit et int r t pour l'innovation.</li></ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><span >Main Responsibilities:</span></p><ol><li>Coordination &amp; Scoping of Marketing Requests: Receive and centralize marketing requests. Verify the completeness and clarity of received briefs. Identify priorities and ensure feasibility (timing, resources).</li><li>Project Structuring &amp; Planning: Define key steps for each project. Establish a clear and shared plan (Tracker). Coordinate internal stakeholders (marketing, creative, etc.). Anticipate risks and alert in case of blockers.</li><li>Operational Monitoring &amp; Reporting: Ensure daily project monitoring. Update progress statuses. Identify friction points. Guarantee deadline adherence.</li><li>Preparation of Communication Elements: Consolidate necessary information for deliverable production. Formalize structured briefs for creative/production teams. Ensure good understanding of marketing expectations.</li><li>Coordination with Creative Teams: Ensure effective transmission of needs. Monitor deliverable production. Centralize feedback and manage back-and-forth. Ensure timing adherence. Presence on set (if required) and adherence to brief.</li><li>Quality Control &amp; Consistency: Verify deliverable compliance with the brief. Ensure consistency with brand guidelines. Report discrepancies and propose adjustments.</li><li>Collaboration &amp; Project Rituals: Participate in scoping and follow-up meetings. Lead brainstorming sessions with creative/production teams. Ensure fluid communication between teams.</li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Proficiency in graphic design software.</li><li>Knowledge of project evaluation methodologies and communication actions.</li><li>Knowledge of legal rules concerning copyrights.</li><li>Editorial skills with excellent grammatical, spelling, and linguistic knowledge.</li><li>Stress management skills.</li><li>Strategic, versatile, pragmatic, enthusiastic, flexible, creative, enterprising, innovative.</li><li>Charismatic, dynamic, rigorous.</li><li>Proficiency in written and spoken French, Arabic, and English.</li></ul><p></p></section>