Automotive Engineer Jobs in Algeria

<p>Develop and retain the client portfolio (dental clinics, practices, distributors) by offering Implantomed's innovative solutions in implantology, radiology, sterilization, and biomaterials. Ensure a high-level technical and commercial support, consistent with the company's image of quality and trust.</p><ul><li>Identify and approach new clients (dentists, clinics, radiology centers).</li><li>Present product ranges (, CADSTAR, DXP Dental chairs radiology . Equipment+++).</li><li>Negotiate and conclude sales in compliance with set objectives.</li><li>Ensure product demonstrations and basic training for practitioners.</li><li>Advise clients on the choice of solutions adapted to their clinical needs.</li><li>Participate in training and events organized by Implantomed.</li><li>Maintain a trusting relationship with existing clients.</li><li>Ensure post-sales follow-up and coordinate with the technical department for after-sales service.</li><li>Relay client needs and feedback to management.</li><li>Monitor performance indicators (turnover, new clients, retention).</li><li>Write regular activity reports.</li><li>Collaborate closely with the sales and technical team.</li></ul><p>Experience required: 2 years in medical device sales (dental products)</p><p>Ability to perform installations and repairs of medical equipment</p><p>Sense of challenge and ability to convince as the client target is very suspicious</p><p>Mastery of office tools pack office and CRM.</p><p>French and English indispensable, Arabic desirable.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience required: 2 years in medical device sales (dental products)</p><p>Ability to perform installations and repairs of medical equipment</p><p>Sense of challenge and ability to convince as the client target is very suspicious</p><p>Diplomas required: Engineer in Electronics, Electromechanics or Biomedical</p><p>Special requirement: Expected values: loyalty, honesty, common project</p><p>Integration into our team implies a moral contract of trust: invest skills in the long term and prioritize the construction of a common project.</p><p>Know-how (Technical and practical skills):</p><ul><li>Commercial prospecting and development: ability to identify, target and convince new clients (dentists, clinics, distributors).</li><li>Argumentation and negotiation: mastery of sales and closing techniques, taking into account the specifics of the medical sector.</li><li>Product knowledge: in-depth understanding of dental devices (implants, biomaterials, radiology, sterilization).</li><li>Technical demonstration: ability to present and simplify complex solutions to practitioners.</li><li>Client follow-up: long-term relationship management, retention and post-sales support.</li><li>Reporting and organization: ability to structure activities, track objectives and report to management.</li><li>Use of digital tools: CRM, Office suite, presentation and communication tools.</li><li>Continuous training: willingness to learn and improve on innovations in the dental sector.</li></ul><p>Soft skills (Personal and relational qualities):</p><ul><li>Customer service orientation: active listening, availability and responsiveness.</li><li>Credibility and pedagogy: ability to inspire trust and clearly explain technical concepts.</li><li>Team spirit: collaboration with internal departments (technical, logistics, after-sales service).</li><li>Autonomy and proactivity: ability to organize work and take initiative.</li><li>Rigor and reliability: commitment to promises, accuracy in information provided.</li><li>Dynamism and motivation: positive energy, perseverance in the face of commercial objectives.</li><li>Adaptability: flexibility in the face of varied client needs and market changes.</li><li>Professional ethics: integrity, respect for company rules and values.</li></ul><p>Software to master: Good mastery of office suite and CRM tools.</p><p>Languages: French and English indispensable, Arabic desirable.</p>

<p>Requirements &amp; Summary</p><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry. Job Duties Under general supervision, Uses cementing knowledge and experience to develop the cementing job design to meet customer requirements, including preliminary job calculations, running computer simulations, designing fluid systems, submitting lab test requests and reviewing and approving test results, performing risk assessments, verifying the design meets regulatory requirements, and providing cost estimates for the planned operation. Provides operational expertise including operational instructions and identifying the resources required to perform the job. Independently performs post job analysis, provides recommendations for improvement, implements agreed improvements for subsequent jobs, shares learning with the Cementing Team and advertises successes by writing, publishing and presenting case histories and industry papers (for example SPE). Develops and maintains personal relationships with the technical customer base in designated area to effectively sell tailored cement solutions. Collaborating with customer office based drilling and / or production engineers, uses cementing knowledge to tailor solutions to meet their requirements and Halliburton&amp;aposs commercial expectations, considering both the price of the solution to the customer as well as the total cost to Halliburton to deliver it. Sells new technology and processes identified in the location&amp;aposs customer specific performance optimization plans (POP). Provides technical support at the well site as required by the customer or PSL. This involves verifying the job design using the final job input parameters and the engineering tools originally used to design the job. Consults with the PSL Team regarding equipment needs and specifications and verifies all resources required for the cementing operation are available and meet local regulatory requirements. Provides chemical and casing equipment forecasts in sufficient time for deliveries to meet forecasted job dates while helping to maintain inventory targets (inventory levels, turn rates, slow moving, excess etc). Performs assignments requiring knowledge and application of basic engineering and commercial principles. Mentors junior members of the Cementing Team. Works independently and may provide work direction to others at site. Completion of an undergraduate degree in a Science, Technology, Engineering or Math discipline required. Requires a minimum of 12 months experience learning cementing operations, job design and technical solutions. Qualifications Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation . Location Rte Rhoude El Baguel, KM 15, Hassi Messaoud, , 30500, Algeria Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Operations Product Service Line: Cementing Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.</p><p><strong>Desired Candidate Profile</strong></p><p>Completion of an undergraduate degree in a Science, Technology, Engineering or Math discipline required. Requires a minimum of 12 months experience learning cementing operations, job design and technical solutions.</p>

<p>Our code is not public, but our governance is theirs: asynchronous communication, exhaustive written documentation, explicit rules, and uncompromising quality gates. It is the only way a small team of humans and AI agents ships serious systems without accumulating technical debt. This role owns the entire product surface: the console through which advertisers and agencies run their campaigns. The Role You will own the frontend of the platform end to end the advertiser and agency console where campaigns, audiences, creatives and reports come to life. This is the most visible part of the build and, today, the least finished; you will have real ownership and a large surface to shape.</p><p>1. The Advertiser &amp; Agency Console.** Build and own the product UI: campaign and line-item management, inventory, creative assets, reporting dashboards, account and admin modules, and the conversational agent interface. You are responsible for how the product feels to use.</p><p>2. A Typed, Contract-First Client.** Our frontend consumes the backend through a typed, contract-first client. You keep the contract tight: no drift between what the backend promises and what the UI assumes.</p><p>3. A Real Design System.** The product is standardising on a proper design system. You will own its implementation, keep components consistent, accessible and internationalised (FR / EN / AR), and work with the studio on the visual direction rather than reinventing it per screen.</p><p>4. AI-First Delivery &amp; Governance.** We expect AI to write most of the code; you are the editor, not the typist. You specify work as explicit, self-sufficient issues, direct agentic tooling to implement, and gatekeep every diff. Components, patterns and decisions are documented. If it is not written down, it does not exist.</p><p>The Tech Stack - Core: modern React, TypeScript. - UI:a component library and a shared design system; data visualisation. -State &amp; Data: server-state and client-state tooling, typed API clients. - Testing: end-to-end and unit testing. - i18n: multi-language (FR / EN / AR). - Cloud: Google Cloud Platform.</p><p><strong>Desired Candidate Profile</strong></p><p>We are looking for a senior frontend engineer who owns a product surface with taste and rigour, and who is comfortable in a lean, high-quality, AI-first environment. This role is not suited to someone who wants a narrow slice of screens inside a large team.</p><ul><li>4+ years building and shipping production React applications, with real ownership of a non-trivial product surface.</li><li>Deep TypeScript, modern React, and a component-library-based UI used at scale.</li><li>Experience with server-state tooling and typed API consumption.</li><li>A real testing habit (end-to-end and unit) and attention to accessibility and internationalisation.</li></ul><p>Core Competencies &amp; Mindset</p><ul><li>AI Development Lifecycle: genuine proficiency editing and validating AI-produced code, and turning ambiguous product goals into specifications an agent can execute.</li><li>Product Sense &amp; Craft: you care how it feels, not only that it renders. Hierarchy, states, and consistency are not afterthoughts.</li><li>Uncompromising Quality: a focus on performance, correctness and maintainability across a large surface, not just the happy path.</li><li>Written &amp; Asynchronous: exceptional written communication; effective in a distributed, async environment (Paris timezone +/- 3h). You document your components and decisions and do not wait to be asked.</li></ul>

<p><br></p><p>The Role You will own the platform and delivery infrastructure end to end the clusters, the infrastructure-as-code, the delivery pipelines, and the operational guarantees behind them. In a lean team, reliability is not a separate department; it is a discipline you carry for everyone.</p><ul><li>1. Infrastructure as Code. Own the cloud footprint through infrastructure-as-code and a GitOps workflow. Infrastructure is declared, reviewed and versioned like any other code no click-ops, no undocumented state.</li><li>2. Delivery Pipelines.Own CI/CD. Builds are reproducible, deployments are predictable, and rollbacks are boring. You make shipping a non-event.</li><li>3. Reliability, Performance &amp; DR. Own observability (metrics, logs, distributed traces), performance testing, and backup / disaster-recovery. You define the SLOs that matter for a real-time serving platform and you make them measurable.</li><li>4. Quality Gates &amp; AI-First CI. Enforce quality at every passage point in the pipeline. Integrating AI into CI/CD automated reviews, security and policy checks is an open frontier here, and we expect you to study it and propose implementations. Everything you build is documented; if it is not written down, it does not exist.</li></ul><p>The Tech Stack - Orchestration: managed Kubernetes on Google Cloud Platform. - IaC &amp; GitOps: infrastructure-as-code and a GitOps workflow. - CI/CD: modern delivery pipelines (and proposals to evolve them). - Observability: metrics, logs, distributed tracing. - Runtime context: Rust services, a React frontend, streaming, relational databases. - Cloud:Google Cloud Platform.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>We are looking for a platform engineer who treats infrastructure as a product, owns reliability for the whole team, and is comfortable in a lean, high-quality, AI-first environment. This role is not suited to someone who wants to run a ticket queue inside a large ops team.</li><li><strong>Essential Experience</strong><ul><li>4+ years in DevOps / platform / SRE roles, running production Kubernetes** for real workloads (GCP preferred).</li><li>Infrastructure-as-code and a GitOps workflow in production; infrastructure declared and reviewed as code.</li><li>Solid CI/CD ownership and a real observability practice (metrics, logs, distributed tracing)</li><li>Experience defining and defending SLOs, performance and disaster-recovery for latency-sensitive systems.</li></ul></li><li><strong>Core Competencies &amp; Mindset</strong><ul><li>AI Development Lifecycle: comfort integrating AI into the delivery workflow, and a point of view on automating quality and security gates in CI.</li><li>Uncompromising Reliability: a maniacal focus on predictability, recoverability and security. Surprises in production are the enemy.</li><li>Written &amp; Asynchronous: exceptional written communication; runbooks and ADRs are part of the job, not a favour. Effective in a distributed, async environment (Paris timezone +/- 3h).</li><li>Ownership:** you carry reliability for the whole team and raise risks before they become incidents.</li></ul></li><li>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Souhaitez-vous contribuer à façonner l’avenir de la santé ? Notre nom, Siemens Healthineers, a été choisi pour rendre hommage à nos collaborateurs qui consacrent leur énergie et leur passion à cette mission. Il reflète leur esprit pionnier, associé à notre longue tradition d’excellence en ingénierie dans un secteur de la santé en constante évolution. Nous vous offrons un environnement flexible et dynamique, avec de nombreuses opportunités de sortir de votre zone de confort afin de vous développer tant sur le plan personnel que professionnel. Cela vous intéresse ? Alors rejoignez notre équipe mondiale en tant que Technicien d’installation sur site, un poste basé à Alger, en Algérie. Notre équipe mondiale : Siemens Healthineers est l’un des leaders mondiaux des technologies médicales. Plus de 70 000 collaborateurs passionnés, répartis dans plus de 70 pays, œuvrent chaque jour pour façonner l’avenir de la santé. Chaque jour, environ 5 millions de patients dans le monde bénéficient de nos technologies et services innovants dans les domaines de l’imagerie diagnostique et thérapeutique, du diagnostic de laboratoire, de la médecine moléculaire, ainsi que de la santé numérique et des services aux entreprises. Notre culture : Notre culture valorise la diversité des points de vue, le dialogue ouvert et la volonté de remettre en question les pratiques établies. Le changement fait partie intégrante de notre travail. Nous souhaitons être moteurs du changement dans notre secteur plutôt que de simplement y réagir. C’est pourquoi nous vous encourageons à relever de nouveaux défis, à tester vos idées et à célébrer vos réussites. Nous recherchons un Customer Service Engineer – Nuclear Medicine. Diplôme d’ingénieur ou Master universitaire, de préférence en électronique, électrotechnique, automatisme, instrumentation ou domaine similaire. Réalise un large éventail de tâches techniques, notamment l’installation, la mise en service, la maintenance et l’évaluation des équipements et systèmes des clients. Capacité d’analyse et de résolution de problèmes complexes, avec une approche structurée du diagnostic et du dépannage. Autonomie et proactivité dans la gestion des interventions et la résolution des problèmes techniques. Détermine les priorités des tâches et des actions, et planifie les interventions en conséquence. Capacité à documenter les interventions, analyser les données techniques et assurer un reporting de qualité. Capacité à former et accompagner les utilisateurs sur les aspects techniques des équipements. Esprit d’équipe et capacité à collaborer efficacement avec différents départements et interlocuteurs. Excellentes compétences en communication, à l’écrit comme à l’oral, avec une forte orientation client. Maîtrise de l’anglais technique, notamment pour la documentation, le support technique et les échanges avec les équipes internationales. Disponibilité et flexibilité pour les interventions sur site et la gestion de situations urgentes. Disponibilité pour des déplacements fréquents sur les différents sites clients. Respect strict des processus, procédures, normes de qualité et réglementations applicables Diversity &amp; Inclusion: At Siemens Healthineers, we embrace and encourage different viewpoints, backgrounds, experiences, expertise, and idiosyncrasies. We encourage our employees to be themselves and empower them to unleash their true potential. This allows different ideas and approaches to thrive. We are on our way, taking one step at a time, all the time. We believe that our differences make us stronger and enable us to be the innovative company we pride ourselves on. Innovation comes from change, and change takes time and persistence. That‘s why we are working on diversity and inclusion every day. GDPR We care about your data privacy and take compliance with GDPR as well as other data protection legislation seriously. For this reason, we ask you not to send us your CV or resume by email. We ask instead that you create a profile in our talent community where you can upload your CV. Setting up a profile lets us know you are interested in career opportunities with us and makes it easy for us to send you an alert when relevant positions become open.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>SUMMARY OF THE ROLE</span></p><br>Join our dynamic team as a sales specialist for retail, you will support the Sales manager in promoting and selling a range of Decorative products to new/existing/specified potential customers by utilizing Jotun’s sales tools and techniques to develop strong customer relationships to achieve budgeted sales, gross margin, days of outstanding sales, and with the aim of increasing Jotun market share and profitability.<br>This position reports to Retail Sales Manager and will be based in Algiers.<p>Responsibilities:</p><br><ul><li><p>Introduce, promote, and sell Decorative products to allocated customers and geographical territories through regular visits to maintain good relationships and obtain market information.</p><br></li><li><p>Execute sales policies and marketing activities in line with company rules and regulations to support business growth, uniformity, and business efficacy.</p><br></li><li><p>Have a robust follow-up on collection per assigned targets to ensure that company working capital conditions remain healthy.</p><br></li><li><p>Maintain good relationships, provide high-quality service to existing distributors, and attend to customers’ complaints.</p><br></li><li><p>Liaise with the client market and respond to inquiries, introducing products and services to dealers.</p><br></li><li><p>Conduct and regularly update territory mapping to assess market potential within the assigned geographical area, working closely with the designated area Sales Manager.</p><br></li></ul><p><span>WHAT WE ARE LOOKING FOR AND WHAT WE OFFER</span></p><br><p><b>We are looking for: </b></p><br><p><span><span>- Engineer / Architect / Sales University Degree.</span></span></p><br><p><span><span>- 2-3 years of Sales experience suitable in Retail.</span></span></p><br><p><span><span>- Strong interpersonal, communication skills</span></span></p><br><p><span><span>- Flexibility to travel in country.</span></span></p><br><p><span><span>- Good proficiency of English Language.</span></span></p><br><p><b>Competencies for this Position: </b></p><br><p><span><span><b>Effective communication</b>: communicates in a clear, precise and structured way; speaks with authority and conviction; presents effectively.</span></span></p><br><p><span><span><b>Execution</b>: adheres to company rules and procedures; executes plans with commitment and determination; achieves high quality results.</span></span></p><br><p><span><span><b>Business Development</b>: identifies and seizes commercial opportunities; has a strong positive impact on business growth and profitability.</span></span></p><br><p><span><span><b>Influence makes</b>: an impact; convinces and persuades others; promotes plans and ideas successfully.</span></span></p><br><p><b>We offer: </b></p><br><p>Competitive compensation and benefits</p><br><p>Continuous learning opportunities and training activities through on-the-job training and our in-house learning Jotun Academy.</p><br><p>Career development opportunities across multiple disciplines and geographies</p><br><p>Leaders who focus on engaging and enabling their team, proven by consistently high employee feedback scores</p><br><p>A supportive and inclusive company culture where you can be your authentic self</p><br><p>A focus on having fun together through team buildings and social activities.</p><br><p><br><span><b>POSITION INFORMATION</b></span></p><br><p><b>Company:</b></p><br>Jotun Technover P SPA<p><br><b>Contract Type:</b></p><br>Regular<p><b>Time Type:</b></p><br>Full time<p><span><b>CLOSING DATE (dd.mm.yyyy):</b></span></p><br>16.08.2026<p><span>WHO WE ARE</span></p><br>Jotun’s story in the MEIA region (Middle East, India and Africa) began in 1962, and has grown to include 18 legal entities committed to achieving success and growth of the Jotun Group. Throughout our history, we have focused on providing our employees with meaningful and challenging work, rewarding them through continued learning and development, underpinned by our values of Loyalty, Care, Respect and Boldness.Jotun Algeria established in 2011, is one of the key markets within the MEIA region. With a production facility Jotun Technover P SPA since 2022 and a rapidly growing team with 1 production facility, 2 warehouses and more than 100 employees, we aim to further strengthen Jotun’s position in Algeria through ambitious market growth plans that focus on innovation, efficiency and profitability.<p>Visit our Career Page to know more about life at Jotun.</p><br><p>Jotun’s company culture welcomes and values differences in people. Our more than 10,200 employees on all continents represent 90 nationalities, four generations and diversity of professions, gender, abilities, ethnicities, beliefs, cultures etc. We are committed to represent the societies we operate in, promoting equality, equity and zero-tolerance for discrimination.</p><br><p>If you are applying to a position and require any additional support in the interview process, please let us know how we can accommodate this. &nbsp;</p><br><p>If you think that this role is what you could be doing next, apply now!</p><br> </div>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Manage the technical studies for HVAC, plumbing, smoke extraction and fluid networks of EPC projects, ensure the sizing of installations, optimize technical solutions and support the work teams until the acceptance of the works.</font></font></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Minimum level: Master's</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> degree (Bac +5)</font></font></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Accepted qualifications:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> Climate Engineering degree. Energy Engineering degree. Thermal Engineering degree. Fluids Engineering degree. Mechanical Engineering degree (HVAC specialization). Master's degree in Climate Engineering or Energy Engineering.</font></font></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Minimum requirement:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> 10 years old / 3 years old South</font></font></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Desired experience:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> Tertiary projects, Hospitals, Shopping centers, Industrial buildings, Hotels.</font></font></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Architecture:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> Reading architectural plans. Coordination of all trades. Construction standards.</font></font></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Technical aspects:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> HVAC. Electrical/Low Voltage. Smoke extraction. Plumbing. Building Management Systems.</font></font></p><p><strong>BIM :</strong> Revit Architecture. Revit MEP. Navisworks. BIM 360. AutoCAD 3D. Navisworks.</p><p><strong>MS Project. Microsoft 365.</strong></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Language:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> English</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Accepted qualifications:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> Climate Engineering degree. Energy Engineering degree. Thermal Engineering degree. Fluids Engineering degree. Mechanical Engineering degree (HVAC specialization). Master's degree in Climate Engineering or Energy Engineering.</font></font></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Minimum requirement:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> 10 years old / 3 years old South</font></font></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Desired experience:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> Tertiary projects, Hospitals, Shopping centers, Industrial buildings, Hotels.</font></font></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Architecture:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> Reading architectural plans. Coordination of all trades. Construction standards.</font></font></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Technical aspects:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> HVAC. Electrical/Low Voltage. Smoke extraction. Plumbing. Building Management Systems.</font></font></p><p><strong>BIM :</strong> Revit Architecture. Revit MEP. Navisworks. BIM 360. AutoCAD 3D. Navisworks.</p><p><strong>MS Project. Microsoft 365.</strong></p><p><strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Language:</font></font></strong><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;"> English</font></font></p>

<p><font dir="auto" ><font dir="auto" >Manage and oversee all technical activities of the company. Guarantee the availability, performance, and maintenance of equipment. Define and monitor maintenance and investment programs. Supervise technical teams and coordinate interventions. Ensure compliance with quality, safety, and regulatory standards. Analyze technical incidents and implement improvement actions.</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" ><font dir="auto" >Engineering degree or Master's degree in Industrial Engineering, Mechanical Engineering, Electrical Engineering, or a related field. Proven experience in a technical management role. Strong skills in the maintenance and management of industrial equipment. Leadership, analytical, and decision-making abilities. Rigor, organization, and a strong sense of responsibility. If you meet these requirements, please submit your CV by clicking on the "Apply" tab in Algiers.</font></font></p>

<p><font dir="auto" ><font dir="auto" >Plan, organize, and supervise all civil engineering work on the construction site. Coordinate the various teams (masons, formwork carpenters, steel fixers, subcontractors, etc.). Read and interpret plans and technical documents. Ensure the works comply with project standards and specifications. Manage the supply of materials, equipment, and supplies. Monitor the quality and progress of the work.</font></font></p><p><strong>Desired Candidate Profile</strong></p><h2><font dir="auto" ><font dir="auto" >Desired profile</font></font></h2> <p><font dir="auto" ><font dir="auto" >Excellent command of construction techniques and civil engineering standards. Ability to read and interpret complex plans. Site, team, and budget management. Proficiency in safety and quality procedures.</font></font></p> <p><font dir="auto" ><font dir="auto" >If you fit this profile, please send your CV by clicking _x000D_ on the apply tab.</font></font></p>

<p><b>Job Overview </b>The Production Technologist is responsible for supporting production optimization, well performance improvement, and integrated asset development activities for customer operations in Algeria. Working within a multidisciplinary environment, this role analyzes production, reservoir, completion, and well performance data to identify production constraints and recommend practical optimization opportunities that maximize hydrocarbon recovery and asset value. The Production Technologist collaborates closely with reservoir engineers, geologists, petrophysicists, drilling and completion engineers, operations personnel, and customer representatives to deliver integrated technical solutions. The role also supports production surveillance, well diagnostics, artificial lift optimization, intervention candidate selection, and mature field development while ensuring compliance with Weatherford's HSE, Quality, and operational excellence standards.</p><p>Responsibilities:</p><ul><li>Analyze production, well, reservoir, completion, and surface network data to evaluate well performance, identify production constraints, and support production optimization initiatives.</li><li>Perform production surveillance, production decline reviews, well diagnostics, and integrated asset performance evaluations using production history, pressure data, well tests, production logs, and reservoir surveillance information.</li><li>Support production enhancement studies by identifying opportunities for artificial lift optimization, stimulation, workovers, water and gas management, production debottlenecking, and well intervention.</li><li>Perform nodal analysis, inflow and outflow performance evaluation, well deliverability assessments, and production system analysis to improve production efficiency.</li><li>Integrate geological, petrophysical, reservoir, completion, and production data to develop practical technical recommendations that improve asset performance.</li><li>Collaborate with reservoir engineers, geoscientists, drilling and completion engineers, production operations, and field personnel to execute multidisciplinary technical studies and production improvement projects.</li><li>Prepare production performance reports, technical evaluations, opportunity rankings, production forecasts, engineering presentations, and client deliverables.</li><li>Utilize production engineering software, surveillance platforms, and data analytics tools to monitor well performance, support technical decision-making, and improve operational efficiency.</li><li>Support client workshops, technical reviews, production optimization studies, and field performance assessments while maintaining strong customer relationships.</li><li>Contribute to continuous improvement initiatives by documenting technical workflows, lessons learned, best practices, and production optimization methodologies.</li><li>Ensure compliance with Weatherford's Health, Safety, Environment (HSE), Quality, Security, Corporate Compliance, and applicable regulatory requirements.</li><li>Maintain effective communication with internal stakeholders and customers to ensure successful project execution, operational excellence, and customer satisfaction.</li><li>Demonstrate financial responsibility by utilizing company resources efficiently and supporting cost-effective production optimization solutions.</li><li>Actively participate in technical development, knowledge sharing, training programs, and continuous professional growth.</li></ul><p>Skills:</p><ul><li>Strong understanding of production technology, production engineering, reservoir engineering, and integrated asset management.</li><li>Knowledge of production optimization, production surveillance, well performance evaluation, and mature field development.</li><li>Experience analyzing production history, pressure data, production logs, well tests, completion data, and reservoir surveillance information.</li><li>Working knowledge of nodal analysis, inflow and outflow performance, well deliverability analysis, artificial lift optimization, stimulation candidate selection, workover evaluation, and intervention planning.</li><li>Understanding of reservoir characterization, petrophysics, geology, completion engineering, and production operations.</li><li>Experience integrating multidisciplinary subsurface and production datasets to develop practical production enhancement recommendations.</li><li>Strong analytical, troubleshooting, and problem-solving capabilities.</li><li>Excellent communication, presentation, and stakeholder management skills with the ability to support customer-facing technical engagements.</li><li>Proficiency with Microsoft Office and production engineering, surveillance, visualization, and data analytics software.</li><li>Ability to work effectively in multidisciplinary teams within a dynamic, client-focused environment.</li><li>Strong commitment to operational excellence, continuous improvement, safety, quality, and customer service.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Petroleum Engineering, Production Engineering, Reservoir Engineering, Geology, Geophysics, or a related subsurface discipline.</li><li>Minimum 5 years of experience in Production Technology, Production Engineering, Reservoir Engineering, Well Performance Analysis, Production Optimization, or Integrated Asset Management.</li><li>Experience supporting production surveillance, well performance evaluation, production optimization, and field performance reviews.</li><li>Knowledge of artificial lift systems, production system analysis, nodal analysis, well intervention, production enhancement, and mature field optimization.</li><li>Experience working within multidisciplinary teams involving reservoir engineering, geology, petrophysics, drilling, completions, and production operations.</li><li>Proficiency in production engineering software, surveillance platforms, and Microsoft Office applications.</li><li>Experience supporting customer-facing production optimization studies, integrated asset management projects, and technical consulting engagements.</li><li>Experience with production engineering and reservoir software such as PIPESIM, Prosper, GAP, OFM, KAPPA, Eclipse, CMG, Petrel, Techlog, or equivalent production surveillance and data analytics platforms.</li><li>Experience with artificial lift optimization, production forecasting, workover candidate screening, stimulation evaluation, water and gas management, and production enhancement campaigns.</li><li>Experience working in North Africa, the Middle East, or similar operating environments.</li><li>Professional certifications or advanced training in Production Engineering, Reservoir Engineering, Artificial Lift, Production Optimization, or Integrated Asset Management.</li><li>Fluency in English is required; French and/or Arabic language skills are considered an advantage.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Monitor the execution of the projects belonging to their group technologies and provide the appropriate corrective actions.</li> <li>Report the status of loading of their engineering teams to the Engineering Manager on monthly basis.</li> <li>Supervise the Engineering Software/ Hardware design documents to continuously enhance it.</li> <li>Ensure the quality and timeliness of delivery service to clients.</li> <li>Assign teams to undertake implementation and execution in addition to the installation activities and follows-up on their work.</li> <li>Supervise the testing process including all internal, workshop, factory acceptance testing (FAT) and site acceptance testing (SAT).</li> <li>Prepare and submit monthly activity reports for his teams to the Engineering Manager.</li> <li>Review weekly progress reports submitted by their team leaders and meet with them to discuss any issues.</li> <li>Monitor and enhance all quality and software coding standards on all project technical activities.</li> <li>Submit staffing needs and hiring plan quarterly to the Engineering Manager.</li> <li>Cooperate with Presales team to carry out site survey, technical presentation, clarification meetings and technical solution verification</li> <li>Liaise with QC team to ensure proper quality level of delivered products / services</li> <li>Coordinate with HSE team to apply ISO 45001 and 14001 standards for all activities carried out by his team</li> <li>Manage teams work planning, operation and internal problems solving to meet with department objectives.</li> <li>Enhance documentation templates related to his group.</li> <li>Ensure that all documents, related to projects handled by his team, are properly saved and archived on company projects portal/server</li> <li>Contribute to the enhancements of the execution work flow.</li> <li>Ensure efficient processes are implemented.</li> <li>Provide feedback to the Engineering &amp; Services Manager on the performance of his team leaders as input into their performance evaluations.</li> <li>Assess skills, knowledge, and abilities of candidates to make to identify developmental needs</li> <li>Provide generic guidance and technical support to his teams.</li> <li>Responsible for growing technical knowledge on existing and new offerings within his team</li> <li>Responsible to assign an SME within his team to be a reference for each product (offering) delivered by his team</li> <li>Plan and manage in-house and external training and development activities for his team</li> </ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 13+ years </div> </div>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Manage the technical studies for HVAC, plumbing, smoke extraction, and fluid networks for EPC projects. Ensure the sizing of installations. Optimize technical solutions and support the construction teams until the works are accepted.</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Minimum education level: Master's degree (Bac+5) in Climate Engineering, Energy Engineering, Thermal Engineering, Fluid Mechanics, Mechanical Engineering with a specialization in HVAC, or a Master's degree in Climate Engineering/Energy Engineering. Experience: Minimum 10 years, including 3 years in the South of France. Project experience: Commercial buildings, hospitals, shopping centers, industrial buildings, and hotels. Technical skills: HVAC, electrical systems, smoke extraction, plumbing, and building management systems (BMS). Architecture and coordination: Ability to read architectural plans, coordinate all trades, and understand building codes. BIM and software: Revit Architecture, Revit MEP, Navisworks, BIM 360, AutoCAD 3D, MS Project, and Microsoft 365. Language: English.</font></font></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Monitor the execution of the projects belonging to their group technologies and provide the appropriate corrective actions.</li> <li>Report the status of loading of their engineering teams to the Engineering Manager on monthly basis.</li> <li>Supervise the Engineering Software/ Hardware design documents to continuously enhance it.</li> <li>Ensure the quality and timeliness of delivery service to clients.</li> <li>Assign teams to undertake implementation and execution&nbsp;in addition to the installation activities and follows-up on their work.</li> <li>Supervise the testing process including all internal, workshop, factory acceptance testing (FAT) and site acceptance testing (SAT).&nbsp;</li> <li>Prepare and submit monthly activity reports for his teams to the Engineering Manager.</li> <li>Review weekly progress reports submitted by their team leaders and meet with them to discuss any issues.</li> <li>Monitor and enhance all quality and software coding standards on all project technical activities.</li> <li>Submit staffing needs and hiring plan quarterly to the Engineering Manager.</li> <li>Cooperate with Presales team to carry out site survey, technical presentation, clarification meetings and technical solution verification</li> <li>Liaise with QC team to ensure proper quality level of delivered products / services</li> <li>Coordinate with HSE team to apply ISO 45001 and 14001 standards for all activities carried out by his team</li> <li>Manage teams work planning, operation and internal problems solving to meet with department objectives.</li> <li>Enhance documentation templates related to his group.</li> <li>Ensure that all documents, related to projects handled by his team, are properly saved and archived on company projects portal/server</li> <li>Contribute to the enhancements of the execution work flow.</li> <li>Ensure efficient processes are implemented.&nbsp;</li> <li>Provide feedback to the Engineering &amp; Services Manager on the performance of his team leaders as input into their performance evaluations.</li> <li>Assess skills, knowledge, and abilities of candidates to make to identify developmental needs</li> <li>Provide generic guidance and technical support to his teams.</li> <li>Responsible for growing technical knowledge on existing and new offerings within his team</li> <li>Responsible to assign an SME within his team to be a reference for each product (offering) delivered by his team</li> <li>Plan and manage in-house and external training and development activities for his team</li> </ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 13+ years </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Monitor the execution of the projects belonging to their group technologies and provide the appropriate corrective actions.</li> <li>Report the status of loading of their engineering teams to the Engineering Manager on monthly basis.</li> <li>Supervise the Engineering Software/ Hardware design documents to continuously enhance it.</li> <li>Ensure the quality and timeliness of delivery service to clients.</li> <li>Assign teams to undertake implementation and execution&nbsp;in addition to the installation activities and follows-up on their work.</li> <li>Supervise the testing process including all internal, workshop, factory acceptance testing (FAT) and site acceptance testing (SAT).&nbsp;</li> <li>Prepare and submit monthly activity reports for his teams to the Engineering Manager.</li> <li>Review weekly progress reports submitted by their team leaders and meet with them to discuss any issues.</li> <li>Monitor and enhance all quality and software coding standards on all project technical activities.</li> <li>Submit staffing needs and hiring plan quarterly to the Engineering Manager.</li> <li>Cooperate with Presales team to carry out site survey, technical presentation, clarification meetings and technical solution verification</li> <li>Liaise with QC team to ensure proper quality level of delivered products / services</li> <li>Coordinate with HSE team to apply ISO 45001 and 14001 standards for all activities carried out by his team</li> <li>Manage teams work planning, operation and internal problems solving to meet with department objectives.</li> <li>Enhance documentation templates related to his group.</li> <li>Ensure that all documents, related to projects handled by his team, are properly saved and archived on company projects portal/server</li> <li>Contribute to the enhancements of the execution work flow.</li> <li>&nbsp;Ensure efficient processes are implemented.&nbsp;</li> <li>Provide feedback to the Engineering &amp; Services Manager on the performance of his team leaders as input into their performance evaluations.</li> <li>Assess skills, knowledge, and abilities of candidates to make to identify developmental needs</li> <li>Provide generic guidance and technical support to his teams.</li> <li>Responsible for growing technical knowledge on existing and new offerings within his team</li> <li>Responsible to assign an SME within his team to be a reference for each product (offering) delivered by his team</li> <li>Plan and manage in-house and external training and development activities for his team</li> </ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 13+ years </div> </div>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Design studies related to electrical engineering. Prepare execution files for implementation and resolve errors encountered during verification. Address any outstanding issues to obtain approval of studies from the relevant organizations. Attend coordination meetings with the client and external organizations. Communicate and coordinate internally and externally with various specialties (Architecture, Civil Engineering, Structural Steelwork, Electrical Engineering, Mechanical and Fluid Engineering, and other technical trades).&nbsp;</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">General Education: Engineering degree or Master's degree in the field. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Professional Training: Additional training in the field. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Proficiency in design studies (plans and calculations). </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Proficiency in specialized software. </font></font><br><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Proficiency in MS Office tools.</font></font></p>

<p><span style="font-size: 11px;">Roles and Responsibilities:</span></p><ul><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">to study and analyze the client's specifications and technical requirements relating to the various projects and equipment</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Identify and clarify clients' technical requirements</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Define the basics of mechanical design (codes, standards, materials, operating conditions, design conditions)</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">To synthesize and capture client requirements and define the scope of the project</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Analyze the Client's technical documents (specifications, plans, calculation notes, terms of reference, etc.) to assess and define the scope of the Project and potential risks</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Implement project/client requirements in mechanical design and engineering documents.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Participate in site visits</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Develop mechanical engineering documents (data sheets, specifications, calculation notes, plans, and other engineering documents).</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Select and size the mechanical equipment (changers, separators, compressors, pumps, piping, etc.)</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Review of ARH preliminary and final files of submitted equipment</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Verify mechanical calculations, calculation notes, and supplier drawings</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Approve manufacturers' engineering documents (plans, data sheets, calculation notes, etc.)</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Prepare the purchase requisitions for the various mechanical equipment</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Validate the conformity of suppliers' engineering documents (data sheets, specifications, drawings, ITPs) with customer, regulatory, and international standard and design code requirements.</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Ensure that all mechanical engineering designs comply with relevant international codes and standards, design criteria, and project specifications.</font></font></li></ul><h3><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Required Skills:</font></font></h3><ul><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Reading and interpretation of plans and P&amp;ID</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Proficient in 3D and CAD software (SolidWorks, AutoCAD) as well as mechanical and piping analysis tools</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Mastery of current local regulations (ARH and others)</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Knowledge of International Standards (BPVC, B16, B31, API)</font></font></li><li>Comp tences en Drafting</li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Ability to work in a team</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Ability to work on different projects simultaneously</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Rigour, autonomy and a sense of responsibility</font></font></li><li><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Written and oral communication skills in English and French</font></font></li></ul><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">3-5 years of experience in a similar position</font></font></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Continuing education on new technologies and developments in mechanical engineering and piping</font></font></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Benefit from a competitive salary package, including performance-related bonuses</font></font></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Explore opportunities for professional development and career advancement within the organization</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Education: Degree in mechanical engineering or equivalent</font></font></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Relevant experience in the design and supervision of mechanical and piping projects</font></font></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Ensure the packaging of pharmaceutical products in compliance with Good Manufacturing Practices (GMP). Prepare, adjust, and supply the packaging lines. Perform visual and quality control checks on packaged products. Complete traceability and production monitoring documents. Guarantee compliance with quality, safety, hygiene, and production deadline requirements.</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2><font dir="auto" ><font dir="auto" >Diploma :</font></font></h2><p><font dir="auto" ><font dir="auto" >Master 2 in Process Engineering, Chemical Engineering or Materials Science.</font></font></p><h2><font dir="auto" ><font dir="auto" >Language :</font></font></h2><p><font dir="auto" ><font dir="auto" >Excellent command of French (perfectly fluent in French).</font></font></p><h2><font dir="auto" ><font dir="auto" >Experience :</font></font></h2><p><font dir="auto" ><font dir="auto" >Prior experience in a similar role would be an asset.</font></font></p><h2><font dir="auto" ><font dir="auto" >SKILLS :</font></font></h2><ul><li><font dir="auto" ><font dir="auto" >Rigor</font></font></li><li><font dir="auto" ><font dir="auto" >Meticulousness</font></font></li><li><font dir="auto" ><font dir="auto" >Sense of organization</font></font></li><li><font dir="auto" ><font dir="auto" >Ability to work in a team</font></font></li></ul><p></p></section>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Design studies related to reinforced concrete buildings. Prepare execution files for construction and resolve errors encountered during verification. Address any outstanding issues to obtain approval of studies from the relevant bodies (such as the CTC). Attend coordination meetings with the project owner and external organizations. Communicate and coordinate internally and externally with the various specialties (Architecture, Civil Engineering, Structural Steelwork, Electrical Engineering, Mechanical and Fluid Engineering, technical building trades).</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">General Education: Engineering degree or Master's degree in Civil Engineering or equivalent. Professional Training: Additional training in the field. Proficiency in specialized software. Proficiency in MS Office tools. Must reside in the Algiers region. If you meet these requirements, please send your CV by clicking on the "Apply" tab for Algiers.</font></font></p>

<p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Manage civil engineering and steel construction projects from design to final acceptance. Define project objectives, resources, timelines, and budgets. Develop schedules and monitor progress. Coordinate engineering firms, construction companies, subcontractors, and suppliers. Supervise civil engineering work. Monitor structural steelwork and steelwork. Verify compliance of work with plans, specifications, standards, and contractual requirements. Review execution plans, quantity surveys, quotes, and technical documents. Organize and lead site meetings and ensure follow-up on agreed-upon actions. Control costs, deadlines, and the quality of completed work. Identify risks and propose necessary corrective measures. Monitor work progress, attachments, accounts, and acceptances. Manage modifications, additional work, and any discrepancies identified on projects. Ensure compliance with QHSE requirements on construction sites. Participate in provisional and final acceptance procedures and follow up on any outstanding issues.</font></font></p><p><strong>Desired Candidate Profile</strong></p><p><font dir="auto" style="vertical-align: inherit;"><font dir="auto" style="vertical-align: inherit;">Engineering degree or Master's degree in Civil Engineering, Construction, Structures, or equivalent. Proven experience in managing and monitoring construction projects, ideally in an industrial environment. Significant experience in steel construction/structural steelwork. Excellent ability to read and analyze civil engineering and steel structure drawings. Sound knowledge of construction methods and site supervision. Proficiency in project planning and management tools. Proficiency in AutoCAD; knowledge of structural analysis and modeling software is an asset. Strong analytical skills in reviewing cost estimates, quantity surveys, progress reports, and contractual documents.</font></font></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><font dir="auto" ><font dir="auto" >Perform pharmaceutical manufacturing operations in accordance with procedures and Good Manufacturing Practices (GMP). Ensure the preparation, start-up, operation, and monitoring of production equipment. Conduct in-process quality checks and complete production documentation. Ensure compliance with quality, hygiene, and safety standards, as well as production deadlines. Report any anomalies and contribute to continuous process improvement.</font></font></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><font dir="auto" ><font dir="auto" >Degree: Master's degree (or equivalent) in Process Engineering, Chemical Engineering, or Materials Science. Language: Excellent command of French (fluent). Experience: Prior experience in a similar role would be an asset. Rigorous, organized, a team player, and committed to following procedures.</font></font></p><p></p></section>